HardLabs

Schematic2ai

janbajc·schematic2ai·examples/kicad_mini.net

This repository ships a schematic but no board layout.

About the Schematic2ai PCB

Schematic2ai is an open source ESP32 PCB design by janbajc, published on GitHub. It is a board, with 2 components from 2 distinct parts.

Its main chip is the ESP32-C3-SuperMini, from the ESP32 family. By type, the board carries 1 IC and 1 resistor.

From the project

Convert electronic schematics (KiCad, EAGLE, Altium, SPICE, PDF, images, Gerber) into AI-readable JSON + Markdown

Convert electronic schematics into AI-readable files (JSON + Markdown) so you can hand them to an LLM.

The Markdown file is what you paste/upload into an AI chat. The JSON file is what your code consumes. PDFs and images also produce a bundle of PNGs you can attach to multimodal models (GPT-4o, Claude, Gemini, etc.).

OCR for image/PDF schematics also needs the tesseract binary installed on your system (e.g. sudo apt install tesseract-ocr on Debian/Ubuntu).

Main components on the Schematic2ai

ESP32-C3-SuperMini

Schematic2ai bill of materials (BOM)

2 components, 2 distinct parts.

QtyPartRefs
1
ESP32-C3-SuperMini
U1
1
10k
R1

Schematic2ai design files

The KiCad project lives in the janbajc/schematic2ai repository on GitHub; these links point at the commit this page was built from.

Schematic2ai: common questions

What microcontroller does the Schematic2ai use?

The Schematic2ai is built around the ESP32-C3-SuperMini, from the ESP32 family.

How many components are on the Schematic2ai?

2 components, from 2 distinct parts. The full bill of materials is listed on this page.

Where can I download the Schematic2ai design files?

From the janbajc/schematic2ai repository on GitHub, which has a netlist; the links under Design files point to each one.

Can I use the Schematic2ai design in my own project?

The repository has no license, so all rights stay with janbajc. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Schematic2ai without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards