HardLabs

Programmer

JAndersM·Z80_Labcomputer·EEPROMprogrammer/Programmer/Programmer.kicad_pcb

Programmer PCB layout, top view — open source AVR/Arduino board by JAndersM

About the Programmer PCB

Programmer is an open source AVR/Arduino PCB design by JAndersM, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 40 × 65 mm, with 9 components from 8 distinct parts.

Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. Other key parts include the 74HC595. By type, the board carries 3 connectors, 2 ICs, 2 resistors, 1 module and 1 diode.

It belongs with the retro computing and usb & debug tools designs in this gallery.

From the project

Z80 based lab computer

Main components on the Programmer

74HC595Arduino_Nano_v3.x

Programmer bill of materials (BOM)

9 components, 8 distinct parts.

QtyPartRefs
2
74HC595
U1, U2
1
Arduino_Nano_v3.x
A1
1
Conn_01x16_Female
J1
1
Conn_01x06_Female
J2
1
Conn_01x08_Female
J3
1
LED
D1
1
2k2
R1
1
10k
R2

Programmer design files

The KiCad project lives in the JAndersM/Z80_Labcomputer repository on GitHub; these links point at the commit this page was built from.

Programmer: common questions

What microcontroller does the Programmer use?

The Programmer is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.

How big is the Programmer PCB?

The Programmer measures 40 × 65 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Programmer?

9 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the Programmer design files?

From the JAndersM/Z80_Labcomputer repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Programmer design in my own project?

Yes, under the terms of its GPL-3.0 license, which JAndersM chose for the repository.

Can I test firmware for the Programmer without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Z80_Labcomputer

Similar boards