Servo controller 3x2
janelia-kicad·servo_controller_3x2
About the Servo controller 3x2 PCB
Servo controller 3x2 is an open source PCB design by janelia-kicad, published on GitHub under the Custom license license. It is a 2-layer board measuring 70.5 × 41.9 mm, with 15 components from 11 distinct parts.
Other key parts include the PCA9685. By type, the board carries 6 resistors, 3 capacitors, 2 connectors, 1 IC, 1 diode and 1 inductor.
It belongs with the robotics & motion designs in this gallery.
From the project
This device independently controls up to 16 5V hobby servos.
Main components on the Servo controller 3x2
Servo controller 3x2 bill of materials (BOM)
15 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PCA9685 | TSSOP28 | U1 |
| 1 | PWR_JACK_2.1x5.5 | DCJACK_2PIN_HIGHCURRENT | P1 |
| 1 | HEADER_03X16 | HEADER_03x16 | P2 |
| 1 | VAL** | MODULAR_DEVICE_BASE_3X2_MALE | MDB1 |
| 1 | diode_schottky_45V_10A | CFP15 | D1 |
| 1 | LED_5V_RED | LED_555-3XXX_R | L1 |
| 1 | 220uF_POL | C_ELEC_10 | C1 |
| 1 | 0.1uF | SM1210 | C2 |
| 1 | 10uF | SM1210 | C3 |
| 2 | 4.7k | SM1210 | R1, R2 |
| 4 | 220x4 | RESISTOR_PACK_SM1206x4 | RP1, RP2, RP3, RP4 |
Servo controller 3x2 design files
The KiCad project lives in the janelia-kicad/servo_controller_3x2 repository on GitHub; these links point at the commit this page was built from.
Servo controller 3x2: common questions
How big is the Servo controller 3x2 PCB?
The Servo controller 3x2 measures 70.5 × 41.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Servo controller 3x2?
15 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Servo controller 3x2 design files?
From the janelia-kicad/servo_controller_3x2 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Servo controller 3x2 design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979