HardLabs

Sciencecamp 2019-datalogger

janisstreib·sciencecamp_2019-datalogger·pcb/sciencecamp_logger.kicad_pcb

Sciencecamp 2019-datalogger PCB layout, top view — open source AVR/Arduino board by janisstreib

About the Sciencecamp 2019-datalogger PCB

Sciencecamp 2019-datalogger is an open source AVR/Arduino PCB design by janisstreib, published on GitHub under the MIT license. It is a 2-layer board measuring 97 × 46 mm, with 29 components from 22 distinct parts.

Its main chip is the Arduino Nano, from the AVR/Arduino family. Other key parts include the 74LVC125 and AMS1117-3.3. By type, the board carries 14 resistors, 4 connectors, 4 capacitors, 2 ICs, 2 switches and 1 module.

Main components on the Sciencecamp 2019-datalogger

74LVC125AMS1117-3.3Arduino Nano

Sciencecamp 2019-datalogger bill of materials (BOM)

29 components, 22 distinct parts.

QtyPartRefs
1
74LVC125
U1
1
AMS1117-3.3
U2
1
Arduino Nano
A1
1
1-Wire
J1
1
HC-SR04
J2
1
OLED
J3
1
Micro_SD_Card_Det
J4
1
9V Battery
BT1
1
switch_bypass
JP1
1
OFF/ON
SW1
1
action
SW2
2
0.01uF
C1, C3
1
10uF
C2
1
0.1u
C4
1
47k
R1
1
1M/100k
R2
1
100k/10k
R3
3
0
R4, R5, R6
1
47/70k
R7
3
47/50k
R8, R10, R11
Show 2 more
QtyPartRefs
2
47k/50k
R9, R14
2
2-4k
R12, R13

Sciencecamp 2019-datalogger design files

The KiCad project lives in the janisstreib/sciencecamp_2019-datalogger repository on GitHub; these links point at the commit this page was built from.

Sciencecamp 2019-datalogger: common questions

What microcontroller does the Sciencecamp 2019-datalogger use?

The Sciencecamp 2019-datalogger is built around the Arduino Nano, from the AVR/Arduino family.

How big is the Sciencecamp 2019-datalogger PCB?

The Sciencecamp 2019-datalogger measures 97 × 46 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Sciencecamp 2019-datalogger?

29 components, from 22 distinct parts. The full bill of materials is listed on this page.

Where can I download the Sciencecamp 2019-datalogger design files?

From the janisstreib/sciencecamp_2019-datalogger repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Sciencecamp 2019-datalogger design in my own project?

Yes, under the terms of its MIT license, which janisstreib chose for the repository.

Can I test firmware for the Sciencecamp 2019-datalogger without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards