39 open source boards using the 74LVC125

Real designs built with the 74LVC125, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

39 boardsClear filters|Most starred

How designs wire the 74LVC125

Read from the KiCad layouts of 25 open source designs, one per repository: what each pin of the 74LVC125 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 15 of 25 designs, most often 100 nF (then 10 µF).
  • The D pins have a series resistor on 10 of 25 designs, most often 3.3 kΩ (then 100 Ω).
Dpin 2, 5, 9, 12Connected to: A connector 28%
  • Series resistor on 40% · 3.3 kΩ (16), 100 Ω (6), 10 kΩ (4)
Opin 3, 6, 8, 11Connected to: A connector 46%
  • Series resistor on 36% · 33 Ω (8), 0 Ω (7), 10 kΩ (5)
GNDpin 7Connected to: GND 88%
VCCpin 14Connected to: 3.3V 85% · a signal 15%
  • Decoupling capacitor on 60% · 100 nF (19), 10 µF (2), 1 nF (1)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PrntrBoardV2 by ghent360, JTAG-SWD-adapter by Neofoxx, Wii-BVM-Card by Shank-Mods and LiBCM-Daughterboard by doppelhub.

The 74LVC125 in open source designs

The gallery holds 39 open source boards using the 74LVC125 from 26 GitHub repositories; a typical one measures about 88.4 × 85.3 mm and carries around 71 components.

64% are two-layer designs, the rest use four layers or more, and 36% carry an open source license.

The most starred is PrntrBoardV2 by ghent360.

Microcontrollers on boards using the 74LVC125

74LVC125: common questions

Where can I find a 74LVC125 reference design?

Each of the 39 boards on this page is a real design using the 74LVC125. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74LVC125 VCC pin?

The VCC pin has a decoupling capacitor on 15 of 25 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 25 open source designs using the 74LVC125.

What resistor goes on the 74LVC125 D pin?

The D pins have a series resistor on 10 of 25 designs, most often 3.3 kΩ (then 100 Ω). Counted from the KiCad layouts of 25 open source designs using the 74LVC125.

What parts are used alongside the 74LVC125?

The 74HC165, AMS1117-3.3, 74AHC1G14, 74HC00 and 74HC123 appear in the most repositories here.

Which microcontrollers do boards using the 74LVC125 use?

Most are built on STM32 (8), AVR/Arduino (7), ESP32 (2) and ESP8266 (1).

How big is a typical board using the 74LVC125?

The median is 88.4 × 85.3 mm, and 64% are two-layer designs.

What is the most popular open source board using the 74LVC125?

By GitHub stars, PrntrBoardV2 by ghent360, with 45 stars.

Can I simulate one of these boards using the 74LVC125 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part