WirelessPendant
About the WirelessPendant PCB
WirelessPendant is an open source PCB design by Jay-Tech, published on GitHub. It is a 2-layer board measuring 54.5 × 100 mm, with 5 components from 3 distinct parts.
By type, the board carries 3 switches and 2 connectors.
It belongs with the iot & wireless, power & battery and rf & radio designs in this gallery.
From the project
Firmware for a wireless handwheel pendant for a grblHAL machine, and for the receiver board that carries it to the PC. The sender application it talks to is a separate project — Jay-Tech/GrblHAL-Sender, whose Wireless Pendant section covers the settings at that end. What crosses
Firmware for a wireless handwheel pendant for a grblHAL machine, and for the receiver board that carries it to the PC. The sender application it talks to is a separate project — Jay-Tech/GrblHAL-Sender, whose Wireless Pendant section covers the settings at that end. What crosses between them is the wire protocol — newline-delimited JSON, the same either way it travels.
WirelessPendant bill of materials (BOM)
5 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_02X16_EVEN_ODD Conn_02x16_Even_Odd | PinHeader_2x16_P2.54mm_Vertical_Left | J2 |
| 1 | CONN_01X04_SOCKET Conn_01x04_Socket | PinHeader_1x04_P2.54mm_Horizontal | J3 |
| 3 | SW_Push | SW_PUSH_1P1T_6x3.5mm_H4.3_APEM_MJTP1243 | SW1, SW2, SW3 |
WirelessPendant design files
The KiCad project lives in the Jay-Tech/WirelessPendant repository on GitHub; these links point at the commit this page was built from.
WirelessPendant: common questions
How big is the WirelessPendant PCB?
The WirelessPendant measures 54.5 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the WirelessPendant?
5 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the WirelessPendant design files?
From the Jay-Tech/WirelessPendant repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the WirelessPendant design in my own project?
The repository has no license, so all rights stay with Jay-Tech. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k