Design with displays
jaym267·Design_with_displays·rgb-light/rgb-light.kicad_pcb
About the Design with displays PCB
Design with displays is an open source RP2040/RP2350 PCB design by jaym267, published on GitHub. It is a 2-layer board measuring 66 × 35.5 mm, with 7 components from 6 distinct parts.
Its main chip is the XIAO-RP2040-SMD, from the RP2040/RP2350 family. By type, the board carries 3 resistors, 1 IC, 1 switch and 1 diode.
It belongs with the displays & leds designs in this gallery.
From the project
For week 4 of Hack Club Half-Life, I designed a small RGB mood light board. A Seeed XIAO RP2040 drives a 5 mm RGB LED. A push button cycles through 7 colours, and a slide potentiometer sets the brightness from off to full.
Main components on the Design with displays
Design with displays bill of materials (BOM)
7 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-RP2040-SMD | XIAO-RP2040-SMD | U1 |
| 1 | 10K | Potentiometer_Bourns_PTA4543_Single_Slide | RV1 |
| 1 | SW_Push | SW_PUSH_6mm | SW1 |
| 1 | LED_RKGB | LED_D5.0mm-4_RGB | D1 |
| 2 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3 |
| 1 | 270 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
Design with displays design files
The KiCad project lives in the jaym267/Design_with_displays repository on GitHub; these links point at the commit this page was built from.
- Layoutrgb-light/rgb-light.kicad_pcb
- Schematicrgb-light/rgb-light.kicad_sch
Design with displays: common questions
What microcontroller does the Design with displays use?
The Design with displays is built around the XIAO-RP2040-SMD, from the RP2040/RP2350 family.
How big is the Design with displays PCB?
The Design with displays measures 66 × 35.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Design with displays?
7 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Design with displays design files?
From the jaym267/Design_with_displays repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Design with displays design in my own project?
The repository has no license, so all rights stay with jaym267. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Design with displays without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k