Piano robot

jboymel·piano-robot·hardware/pcb/solenoid-driver-v2.kicad_pcb

Piano robot PCB layout, top view — open source board by jboymel

About the Piano robot PCB

Piano robot is an open source PCB design by jboymel, published on GitHub. It is a 2-layer board measuring 163.8 × 52.4 mm, with 71 components from 12 distinct parts.

Other key parts include the 74HC595. By type, the board carries 24 resistors, 16 connectors, 13 diodes, 12 transistors, 4 capacitors and 2 ICs.

It belongs with the robotics & motion designs in this gallery.

From the project

Modular solenoid-based robotic piano actuator system — Northwestern SURG 2026

A modular, clamp-on solenoid system that plays an acoustic piano from a MIDI score. Scaled from a one-octave prototype to a 7-octave (84-key) array of daisy-chained driver boards.

Northwestern University · Summer Undergraduate Research Grant (SURG) 2026 Jordan Boymel · Advisor: Dr. Brenna Argall, Assistive & Rehabilitation Robotics Lab, Shirley Ryan AbilityLab

Piano robot, from the project README
From the project README

Main components on the Piano robot

Piano robot bill of materials (BOM)

71 components, 12 distinct parts.

QtyPartRefs
2
74HC595
U1, U2
12
IRLZ44N
Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +4
12
Screw_Terminal_01x02
J1, J2, J3, J4, J5, J6, J7, J8 +4
2
Conn_01x05_Pin
J13, J14
2
Screw_Terminal_01x02
J15, J16
1
SMBJ28A
D1
12
FR307
D2, D3, D4, D5, D6, D7, D8, D9 +4
1
10µF
C1
1
1000µF
C2
2
0.1µF
C3, C4
12
10kΩ
R1, R3, R5, R7, R9, R11, R13, R15 +4
12
220Ω
R2, R4, R6, R8, R10, R12, R14, R16 +4

Piano robot design files

The KiCad project lives in the jboymel/piano-robot repository on GitHub; these links point at the commit this page was built from.

Piano robot: common questions

How big is the Piano robot PCB?

The Piano robot measures 163.8 × 52.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Piano robot?

71 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the Piano robot design files?

From the jboymel/piano-robot repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Piano robot design in my own project?

The repository has no license, so all rights stay with jboymel. Use it as a reference, and ask the author before reusing the design.

Similar boards