Psu switching reg
jc-roth·pcb_power_supply·psu_switching_reg/psu_switching_reg.kicad_pcb
About the Psu switching reg PCB
Psu switching reg is an open source PCB design by jc-roth, published on GitHub. It is a 2-layer board measuring 100 × 30 mm, with 21 components from 7 distinct parts.
Other key parts include the R-78B5.0-2.0 and R-78B12-2.0. By type, the board carries 8 capacitors, 5 connectors, 4 ICs and 2 inductors.
It belongs with the power & battery designs in this gallery.
From the project
KiCAD project for a basic power supply
Main components on the Psu switching reg
Psu switching reg bill of materials (BOM)
21 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | R-78B5.0-2.0 | R-78Bxx-2.0 | U1, U2 |
| 2 | R-78B12-2.0 | R-78Bxx-2.0 | U3, U4 |
| 1 | Conn_Coaxial_Power | CUI_PJ-037B | J1 |
| 4 | CONN_01X10_PIN Conn_01x10_Pin | JST_ZH_B10B-ZR_1x10_P1.50mm_Vertical | J2, J3, J4, J5 |
| 2 | Keystone Electronics 621 | Keystone 621 | H1, H2 |
| 2 | 4.7U 4.7u | L_Axial_L7.0mm_D3.3mm_P2.54mm_Vertical_Fastron_MICC | L1, L2 |
| 8 | C440198 10u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8 |
Psu switching reg design files
The KiCad project lives in the jc-roth/pcb_power_supply repository on GitHub; these links point at the commit this page was built from.
Psu switching reg: common questions
How big is the Psu switching reg PCB?
The Psu switching reg measures 100 × 30 mm, has 2 copper layers and is 1.6062 mm thick.
How many components are on the Psu switching reg?
21 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Psu switching reg design files?
From the jc-roth/pcb_power_supply repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Psu switching reg design in my own project?
The repository has no license, so all rights stay with jc-roth. Use it as a reference, and ask the author before reusing the design.
More boards in pcb_power_supply
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k