TFTTetris
jc2216·TFTTetris·PCB/tetris.kicad_pcb
About the TFTTetris PCB
TFTTetris is an open source RP2040/RP2350 PCB design by jc2216, published on GitHub. It is a 2-layer board measuring 67 × 73.5 mm, with 17 components from 15 distinct parts.
Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 5 connectors, 3 resistors, 2 transistors, 2 switches, 2 capacitors and 1 module.
It belongs with the power & battery designs in this gallery.
From the project
Play tetris on a tft board
- TFT is connected to Raspberry Pi Pico through a few pins. Capacitors are also connected to soak up current spikes when the screen redraws. - Transistors + Resistors to safely power backlight, while also allowing firmware to turn it on/off. - MPU-6050 connected to Raspberry Pi Pico to detect rotational motion. Push button also connected to the Pi. - Buzzer requires transistor to get more current than what the Pi can supply. Resistor limits current to transistor to be safe. - TPU-4056 Battery Pads are connected to the Battery Socket. TP4056 Output pads are connected to Slide Switch, which can…
Main components on the TFTTetris
TFTTetris bill of materials (BOM)
17 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RaspberryPi_Pico | RaspberryPi_Pico_Common_Unspecified | A1 |
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | S8050 | TO-92_Inline | Q2 |
| 2 | CONN_01X08 Conn_01x08 | PinHeader_1x08_P2.54mm_Vertical | J1, J2 |
| 2 | CONN_01X02_PIN Conn_01x02_Pin | PinSocket_1x02_P2.54mm_Vertical | J3, J5 |
| 1 | CONN_01X02_PIN Conn_01x02_Pin | Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal | J4 |
| 1 | Active Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | SW_Push | SW_PUSH_6mm | SW1 |
| 1 | SW_SPDT | PinHeader_1x03_P2.00mm_Vertical | SW2 |
| 1 | D_Schottky | D_SMA | D1 |
| 1 | 10 µF | C_0805_2012Metric | C1 |
| 1 | 100 nF | C_0805_2012Metric | C2 |
| 1 | 100 Ω | R_0805_2012Metric | R1 |
| 1 | 10 kΩ | R_0805_2012Metric | R2 |
| 1 | 1 kΩ | R_0805_2012Metric | R3 |
TFTTetris design files
The KiCad project lives in the jc2216/TFTTetris repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/tetris.kicad_pcb
- SchematicPCB/tetris.kicad_sch
- BOMPCB/production/bom.csv
TFTTetris: common questions
What microcontroller does the TFTTetris use?
The TFTTetris is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.
How big is the TFTTetris PCB?
The TFTTetris measures 67 × 73.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TFTTetris?
17 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TFTTetris design files?
From the jc2216/TFTTetris repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the TFTTetris design in my own project?
The repository has no license, so all rights stay with jc2216. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the TFTTetris without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k