PicoPost
jeffangelion·PicoPost·hardware/kicad/PicoPost.kicad_pcb
About the PicoPost PCB
PicoPost is an open source RP2040/RP2350 PCB design by jeffangelion, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 18.4 × 23.5 mm, with 18 components from 7 distinct parts.
Its main chip is the RP2040-Zero, from the RP2040/RP2350 family. Other key parts include the 7S2D. By type, the board carries 10 resistors, 3 connectors, 3 diodes and 2 ICs.
From the project
Compact RP2040-based BIOS POST Code Reader & LPC Bus Sniffer
This folder contains all KiCad design files, schematics, fabrication gerbers, and documentation for the PicoPost PCB.
- kicad/: Complete KiCad 7 / 8 project: - PicoPost.kicadpro — Project file - PicoPost.kicadsch — Root schematic sheet - PicoPost.kicadpcb — Board layout - 7S2D.kicadsch — 7-Segment display subsystem - SoM.kicadsch — RP2040-Zero controller subsystem - LPC.kicadsch — LPC header connector - UART.kicadsch — UART header - LPCASUS10Pin.kicadsch, LPCGIGABYTE12Pin.kicadsch, eLPCASUS12Pin.kicadsch — Vendor-specific LPC breakouts - Library.kicadsym, Library.pretty/ — Project footprints…
Main components on the PicoPost
PicoPost bill of materials (BOM)
18 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2040-Zero | RP2040-Zero TNT | U1 |
| 1 | 7S2D | Display_7S2D_10Pin_150x100 | U2 |
| 1 | 7S2D | PinHeader_2x05_P2.54mm_Vertical_SMD | J1 |
| 1 | UART | PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | LPC | PinHeader_2x05_P2.54mm_Vertical | J3 |
| 3 | D | D_SOD-323 | D1, D2, D3 |
| 10 | 36R | R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8 +2 |
PicoPost design files
The KiCad project lives in the jeffangelion/PicoPost repository on GitHub; these links point at the commit this page was built from.
PicoPost: common questions
What microcontroller does the PicoPost use?
The PicoPost is built around the RP2040-Zero, from the RP2040/RP2350 family.
How big is the PicoPost PCB?
The PicoPost measures 18.4 × 23.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PicoPost?
18 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PicoPost design files?
From the jeffangelion/PicoPost repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PicoPost design in my own project?
Yes, under the terms of its Apache-2.0 license, which jeffangelion chose for the repository.
Can I test firmware for the PicoPost without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k