Mainboard H7
JennystonJ·Force-Feedback-Yoke·Hardware/Mainboard H7/Mainboard H7.kicad_pcb
About the Mainboard H7 PCB
Mainboard H7 is an open source PCB design by JennystonJ, published on GitHub under the MIT license. It is a 4-layer board measuring 85 × 74 mm, with 38 components from 25 distinct parts.
By type, the board carries 19 connectors, 9 resistors, 8 capacitors, 1 IC and 1 switch.
It belongs with the robotics & motion designs in this gallery.
From the project
Testing force feedback in a flight simulator yoke.

Mainboard H7 bill of materials (BOM)
38 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | FK743M3-VGT6 | U1 |
| 1 | Encoder_2 | JST_PH_B9B-PH-K_1x09_P2.00mm_Vertical | J1 |
| 1 | Encoder_1_AB | JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J2 |
| 1 | M1_Communication | PinHeader_2x04_P2.54mm_Vertical | J3 |
| 1 | M1_Driver | PinHeader_2x06_P2.54mm_Vertical | J4 |
| 1 | M2_Communication | PinHeader_2x04_P2.54mm_Vertical | J5 |
| 1 | M2_Driver | PinHeader_2x06_P2.54mm_Vertical | J6 |
| 1 | I2C Expansion 1 | JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J7 |
| 1 | I2C Expansion 2 | JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J8 |
| 1 | Encoder_1 | JST_PH_B9B-PH-K_1x09_P2.00mm_Vertical | J9 |
| 1 | Encoder_2_AB | JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J10 |
| 1 | ADC_2 | JST_PH_B10B-PH-K_1x10_P2.00mm_Vertical | J11 |
| 1 | ADC_1 | JST_PH_B10B-PH-K_1x10_P2.00mm_Vertical | J12 |
| 1 | Yoke_Handle | JST_PH_B10B-PH-K_1x10_P2.00mm_Vertical | J13 |
| 1 | M1_Current_Sense | JST_PH_B8B-PH-K_1x08_P2.00mm_Vertical | J14 |
| 1 | M2_Current_Sense | JST_PH_B8B-PH-K_1x08_P2.00mm_Vertical | J15 |
| 1 | PROBE | PinHeader_1x03_P2.54mm_Vertical | J16 |
| 1 | UART | PinHeader_1x04_P2.54mm_Vertical | J17 |
| 1 | Power Output | PinHeader_1x02_P2.54mm_Vertical | J18 |
| 1 | CAN | PinHeader_1x05_P2.54mm_Vertical | J19 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SW_Push | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | SW1 |
| 8 | 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8 |
| 4 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4 |
| 4 | 4.7k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6, R7, R8 |
| 1 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
Mainboard H7 design files
The KiCad project lives in the JennystonJ/Force-Feedback-Yoke repository on GitHub; these links point at the commit this page was built from.
Mainboard H7: common questions
How big is the Mainboard H7 PCB?
The Mainboard H7 measures 85 × 74 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Mainboard H7?
38 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the Mainboard H7 design files?
From the JennystonJ/Force-Feedback-Yoke repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Mainboard H7 design in my own project?
Yes, under the terms of its MIT license, which JennystonJ chose for the repository.
More boards in Force-Feedback-Yoke
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979