Three Phase Current Sensor
JennystonJ·Force-Feedback-Yoke·Hardware/Three Phase Current Sensor/Three Phase Current Sensor.kicad_pcb
About the Three Phase Current Sensor PCB
Three Phase Current Sensor is an open source PCB design by JennystonJ, published on GitHub under the MIT license. It is a 2-layer board measuring 39.8 × 49.6 mm, with 23 components from 11 distinct parts.
Other key parts include the LMV796MFX and INA241A2IDR. By type, the board carries 8 capacitors, 6 resistors, 5 connectors and 4 ICs.
It belongs with the robotics & motion and sensors designs in this gallery.
From the project
Testing force feedback in a flight simulator yoke.

Main components on the Three Phase Current Sensor
Three Phase Current Sensor bill of materials (BOM)
23 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LMV796MFX | DBV0005A-MFG | U1 |
| 3 | INA241A2IDR | SOIC-8_3.9x4.9mm_P1.27mm | U2, U3, U4 |
| 1 | Current Sense Out | JST_PH_B8B-PH-K_1x08_P2.00mm_Vertical | J1 |
| 3 | Conn_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J2, J3, J4 |
| 1 | Power | Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J5 |
| 2 | 10uF | C_0603_1608Metric | C1, C8 |
| 1 | 10nF | C_0603_1608Metric | C2 |
| 5 | 0.1uF | C_0603_1608Metric | C3, C4, C5, C6, C7 |
| 2 | 10k | R_0603_1608Metric | R1, R2 |
| 3 | 5m | R_2512_6332Metric | R3, R4, R5 |
| 1 | 50 | R_0603_1608Metric | R6 |
Three Phase Current Sensor design files
The KiCad project lives in the JennystonJ/Force-Feedback-Yoke repository on GitHub; these links point at the commit this page was built from.
Three Phase Current Sensor: common questions
How big is the Three Phase Current Sensor PCB?
The Three Phase Current Sensor measures 39.8 × 49.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Three Phase Current Sensor?
23 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Three Phase Current Sensor design files?
From the JennystonJ/Force-Feedback-Yoke repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Three Phase Current Sensor design in my own project?
Yes, under the terms of its MIT license, which JennystonJ chose for the repository.
More boards in Force-Feedback-Yoke
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k