HardLabs

ADC Theatre Bar Lighting Controller - Menu Buttons

jevans3142·adc-bar-lx·hardware/menu-buttons/menu-buttons.kicad_pcb

ADC Theatre Bar Lighting Controller - Menu Buttons PCB layout, top view — open source board by jevans3142

About the ADC Theatre Bar Lighting Controller - Menu Buttons PCB

ADC Theatre Bar Lighting Controller - Menu Buttons is an open source PCB design by jevans3142, published on GitHub. It is a 2-layer board measuring 29.2 × 35.6 mm, with 5 components from 5 distinct parts.

By type, the board carries 4 switches and 1 connector.

It belongs with the dev boards & breakouts and iot & wireless designs in this gallery.

From the project

Bar lighting controller for the ADC Theatre

This repository hosts the software and hardware design for the ADC Theatre's bar lighting scene controller. The system is based around an ESP32 chip (using a development board typicaly found online as the DOIT board - 30 pin version, though as we are not using WiFi or Bluetooth etc the hardware could be easily adapted to another chip version) with DMX input and output, audio input for sound-to-light mode, and a remote scene set control panel.

ADC Theatre Bar Lighting Controller - Menu Buttons bill of materials (BOM)

5 components, 5 distinct parts.

QtyPartRefs
1
Conn_01x05
J1
1
Menu
SW1
1
Set
SW2
1
Up
SW3
1
Down
SW4

ADC Theatre Bar Lighting Controller - Menu Buttons design files

The KiCad project lives in the jevans3142/adc-bar-lx repository on GitHub; these links point at the commit this page was built from.

ADC Theatre Bar Lighting Controller - Menu Buttons: common questions

How big is the ADC Theatre Bar Lighting Controller - Menu Buttons PCB?

The ADC Theatre Bar Lighting Controller - Menu Buttons measures 29.2 × 35.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ADC Theatre Bar Lighting Controller - Menu Buttons?

5 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the ADC Theatre Bar Lighting Controller - Menu Buttons design files?

From the jevans3142/adc-bar-lx repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the ADC Theatre Bar Lighting Controller - Menu Buttons design in my own project?

The repository has no license, so all rights stay with jevans3142. Use it as a reference, and ask the author before reusing the design.

More boards in adc-bar-lx

Similar boards