S2l board
About the S2l board
S2l board is an open source PCB design by jevans3142, published on GitHub. It is a 2-layer board measuring 91.4 × 99.1 mm, with 61 components from 24 distinct parts.
Other key parts include the LM741. By type, the board carries 27 resistors, 18 capacitors, 8 diodes, 5 ICs and 3 connectors.
It belongs with the dev boards & breakouts and iot & wireless designs in this gallery.
From the project
Bar lighting controller for the ADC Theatre
This repository hosts the software and hardware design for the ADC Theatre's bar lighting scene controller. The system is based around an ESP32 chip (using a development board typicaly found online as the DOIT board - 30 pin version, though as we are not using WiFi or Bluetooth etc the hardware could be easily adapted to another chip version) with DMX input and output, audio input for sound-to-light mode, and a remote scene set control panel.
Main components on the S2l board
S2l board bill of materials (BOM)
61 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | LM741 | DIP-8_W7.62mm_Socket | U1, U2, U3, U4, U5 |
| 1 | To XLR3-M input | Molex_KK254_1x04Vertical | J1 |
| 1 | To motherboard | Molex_KK254_1x04Vertical | J2 |
| 1 | From PSU | Molex_KK254_1x04Vertical | J3 |
| 4 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D3, D5, D7 |
| 4 | D_Zener | D_DO-35_SOD27_P7.62mm_Horizontal | D2, D4, D6, D8 |
| 5 | 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2, C7, C11, C15 |
| 1 | 220pF | C_Disc_D3.0mm_W2.0mm_P2.50mm | C3 |
| 4 | 47uF | CP_Radial_D4.0mm_P1.50mm | C4, C8, C12, C16 |
| 1 | 10nF | C_Rect_L7.0mm_W2.5mm_P5.00mm | C5 |
| 1 | 20nF | C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C6 |
| 6 | 100nF | C_Rect_L7.2mm_W4.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C9, C10, C13, C14, C17, C18 |
| 6 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R8, R11, R12, R18, R27 |
| 2 | 6.8k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R9 |
| 1 | 3.3k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 100R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 2 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R6 |
| 5 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7, R14, R15, R20, R25 |
| 4 | 2.2k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10, R16, R21, R26 |
| 2 | 22k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R13, R22 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 47k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R17 |
| 1 | 320R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R19 |
| 1 | 4.7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R23 |
| 1 | 220R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R24 |
S2l board design files
The KiCad project lives in the jevans3142/adc-bar-lx repository on GitHub; these links point at the commit this page was built from.
S2l board: common questions
How big is the S2l board?
The S2l board measures 91.4 × 99.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the S2l board?
61 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the S2l board design files?
From the jevans3142/adc-bar-lx repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the S2l board design in my own project?
The repository has no license, so all rights stay with jevans3142. Use it as a reference, and ask the author before reusing the design.
More boards in adc-bar-lx
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
RPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0k