DragonATXProtoRAMROM

jimbro1000·DragonATXProtoRAMROM

DragonATXProtoRAMROM PCB layout, top view — open source board by jimbro1000

About the DragonATXProtoRAMROM PCB

DragonATXProtoRAMROM is an open source PCB design by jimbro1000, published on GitHub under the MIT license. It is a 2-layer board measuring 153.1 × 66.1 mm, with 29 components from 11 distinct parts.

Other key parts include the 28C256, MK4164N, 74LS244 and 74LS08. By type, the board carries 11 ICs, 10 capacitors and 7 resistors.

From the project

RAM and ROM component board for ATX Prototype backplane

This repository contains the KiCad project files to produce the RAM and ROM component board for my ATX Prototype backplane.

This design requires the ATX backplane board in order to operate See https://github.com/jimbro1000/DragonATXProto

Revision 1 of the board contains a design using conventional DRAM, either 64k or 256k. Revision 2 will use SRAM.

Revision 3 will contain just a Flash ROM for use with the FPGA board on the backplane as this carries a large volume of RAM onboard.

DragonATXProtoRAMROM, from the project README
From the project README

Main components on the DragonATXProtoRAMROM

DragonATXProtoRAMROM bill of materials (BOM)

29 components, 11 distinct parts.

QtyPartRefs
1
28C256
IC1
8
MK4164N
IC2, IC3, IC4, IC5, IC6, IC7, IC8, IC9
1
74LS244
IC10
1
74LS08
IC11
1
~
PL1
9
0.1uF
C1, C2, C3, C4, C5, C6, C7, C8 +1
1
33pF
C10
4
220R
R1, R2, R3, R5
1
1K5
R4
1
4K7
R6
1
220R
RN1

DragonATXProtoRAMROM design files

The KiCad project lives in the jimbro1000/DragonATXProtoRAMROM repository on GitHub; these links point at the commit this page was built from.

DragonATXProtoRAMROM: common questions

How big is the DragonATXProtoRAMROM PCB?

The DragonATXProtoRAMROM measures 153.1 × 66.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the DragonATXProtoRAMROM?

29 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the DragonATXProtoRAMROM design files?

From the jimbro1000/DragonATXProtoRAMROM repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the DragonATXProtoRAMROM design in my own project?

Yes, under the terms of its MIT license, which jimbro1000 chose for the repository.