101 open source boards using the 28C256

Real designs built with the 28C256, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

101 boardsClear filters|Most starred

How designs wire the 28C256

Read from the KiCad layouts of 77 open source designs, one per repository: what each pin of the 28C256 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 37 of 76 designs, most often 100 nF (then 47 µF).
GNDpin 14Connected to: GND 94%
VCCpin 28Connected to: 5V 93%
  • Decoupling capacitor on 49% · 100 nF (44), 47 µF (1)

26 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 512k by homebrew8088, Wifi game boy cartridge by Staacks, RC6502 Apple 1 SBC by tebl and 65C02 Computer by dbuchwald.

The 28C256 in open source designs

The gallery holds 101 open source boards using the 28C256 from 80 GitHub repositories; a typical one measures about 127 × 99.1 mm and carries around 45 components.

85% are two-layer designs, the rest use four layers or more, and 56% carry an open source license.

The most starred is Wifi game boy cartridge by Staacks.

Microcontrollers on boards using the 28C256

28C256: common questions

Where can I find a 28C256 reference design?

Each of the 101 boards on this page is a real design using the 28C256. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 28C256 VCC pin?

The VCC pin has a decoupling capacitor on 37 of 76 designs, most often 100 nF (then 47 µF). Counted from the KiCad layouts of 77 open source designs using the 28C256.

What parts are used alongside the 28C256?

The 74HC00, 74LS138, 74LS32, 74LS00 and 74HC14 appear in the most repositories here.

Which microcontrollers do boards using the 28C256 use?

Most are built on AVR/Arduino (13), RP2040/RP2350 (2), PIC (1) and ESP8266 (1).

How big is a typical board using the 28C256?

The median is 127 × 99.1 mm, and 85% are two-layer designs.

What is the most popular open source board using the 28C256?

By GitHub stars, Wifi game boy cartridge by Staacks, with 238 stars.

Can I simulate one of these boards using the 28C256 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part