129 open source boards using the 74LS244
Real designs built with the 74LS244, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687Raemixx500
SukkoPera
365.8 × 254 mm349 parts2LNo license313Instruction
jes
237.5 × 102.9 mm110 parts2LUnlicense3012063-Z80
Z80-Retro
100 × 100 mm78 parts4LNo license97CGA Redux
hkzlab
337.6 × 105.7 mm168 parts4LCC-BY-NC-4.056TI99 22
danwerner21
350 × 224.3 mm242 parts2LNo license50- schematic only · 22 parts
NeoGeoAES-3.5
Board-Folk
22 partsNo license47 ES688 ISA8
hkzlab
104.1 × 99.1 mm121 parts4LCC-BY-NC-4.046TRS-80 Color Computer 3
qbancoffee
280 × 156.3 mm205 parts2LGPL-3.040Dragon64
danwerner21
333.2 × 205.9 mm220 parts2LNo license34Kicad amiga2000
rhaamo
416.3 × 345.8 mm537 parts2LCC0-1.033We816
danwerner21
360.1 × 141.4 mm128 parts2LNo license32IBMExtender
schlae
203.2 × 105.4 mm43 parts4LNo license32Z80VDP1B
lynchaj
100 × 100 mm93 parts2LNo license31- schematic only · 84 parts
Commodore-PC10-III-Reproduction
Board-Folk
84 partsNo license27 VideoMacPacHack
apmcpherson
113 × 69 mm30 parts4LNo license26RC1 UI
tebl
99.1 × 97.2 mm89 parts2LCERN-OHL-1.225BeanZee
PainfulDiodes
103.6 × 79.8 mm30 parts2LMIT23- schematic only · 89 parts
Proton Turbo XT
skiselev
89 partsNo license22 Fennec6800
ChartreuseK
218 × 131.9 mm113 parts2LBSD-3-Clause20TTL-to-RGB
hkzlab
47 × 62.2 mm31 parts4LCC-BY-NC-4.020ALU1 - 副本
Left-Hand
99.7 × 99.7 mm73 parts2LNo license19- schematic only · 419 parts
Retro-Schematics
omega9380
419 partsMIT19 MyCpu
fortinsylvain
194.5 × 188.6 mm156 parts4LMIT18ISA DualUARTParport
hkzlab
176.5 × 90.2 mm69 parts2LCC-BY-NC-4.018Microdigital - TK 2000
clemarfolly
236.8 × 169.8 mm195 parts2LNo license17CompaqportableIII
raymondh2
194 × 170.6 mm123 parts2LNo license17GX700-PWB
NaokiS28
147.5 × 100 mm121 parts2LNo license16AVG Discrete
nmikstas
121.9 × 91.4 mm36 parts2LNo license14OpenC16JoyAdapter
SukkoPera
30.5 × 42.9 mm8 parts2LNo license14Coco9511pak
barberd
98.3 × 107.1 mm43 parts2LGPL-3.012AVR/Arduino
Cat644
carangil
101.6 × 76.2 mm46 parts2LGPL-2.011Qx10 titan clone
brijohn
281 × 79 mm48 parts2LNo license9YN2413 MOTO
dinoflorenzi
61 × 69.9 mm32 parts2LNo license9TIM-011B
Board-Folk
232.8 × 204.2 mm149 parts2LNo license8AVR/Arduino
CortexPC
danwerner21
244 × 244 mm155 parts2LNo license7
How designs wire the 74LS244
Read from the KiCad layouts of 83 open source designs, one per repository: what each pin of the 74LS244 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 46 of 82 designs, most often 100 nF (then 10 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 10 | Connected to: GND 98% | — |
| VCCpin 20 | Connected to: 5V 96% |
|
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Snark barker by schlae, MCL64 by MicroCoreLabs, TRS-80 Color Computer 3 by baldengineer and Raemixx500 by SukkoPera.
The 74LS244 in open source designs
The gallery holds 129 open source boards using the 74LS244 from 92 GitHub repositories; a typical one measures about 175 × 105.4 mm and carries around 79 components.
85% are two-layer designs, the rest use four layers or more, and 39% carry an open source license.
The most starred is Snark barker by schlae.
Parts used alongside the 74LS244
Microcontrollers on boards using the 74LS244
What boards using the 74LS244 are built for
74LS244: common questions
Where can I find a 74LS244 reference design?
Each of the 129 boards on this page is a real design using the 74LS244. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LS244 VCC pin?
The VCC pin has a decoupling capacitor on 46 of 82 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 83 open source designs using the 74LS244.
What parts are used alongside the 74LS244?
The 74LS04, 74LS32, 74LS245, 74LS138 and 74LS08 appear in the most repositories here.
Which microcontrollers do boards using the 74LS244 use?
Most are built on AVR/Arduino (6), RP2040/RP2350 (2), PIC (2) and ESP32 (1).
How big is a typical board using the 74LS244?
The median is 175 × 105.4 mm, and 85% are two-layer designs.
What is the most popular open source board using the 74LS244?
By GitHub stars, Snark barker by schlae, with 687 stars.
Can I simulate one of these boards using the 74LS244 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.