My hero access control
jineshpb·my-hero-access-control
About the My hero access control PCB
My hero access control is an open source PCB design by jineshpb, published on GitHub. It is a board, with 8 components from 8 distinct parts.
By type, the board carries 4 connectors, 1 battery holder, 1 speaker, 1 switch and 1 diode.
It belongs with the audio and power & battery designs in this gallery.
From the project
Client handoff package for the wall-mounted SOS / service-access prototype.
Client handoff package for the wall-mounted SOS / service-access prototype.
The device lets someone trigger a remote SOS alert (lights + siren + cloud webhook), shows Wi‑Fi status on a dedicated LED, and unlocks a service latch via RFID for maintenance access.
- SOS button — toggles local alert (NeoPixel strip + I2S siren) and posts to the SOS API - Status LED — boot → pins OK → Wi‑Fi ready (red → amber → green) - Wi‑Fi setup portal — captive portal on first boot / button-hold; credentials stored on device - Heartbeat — periodic status POST while online - RFID unlock — authorized RC522 tag…
My hero access control bill of materials (BOM)
8 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LEFT | J1 | |
| 1 | RIGHT | J2 | |
| 1 | MAX17048 | J3 | |
| 1 | MAX98357A | J4 | |
| 1 | Battery_Cell | BT1 | |
| 1 | Speaker | LS1 | |
| 1 | SW_Push | SW1 | |
| 1 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1 |
My hero access control design files
The KiCad project lives in the jineshpb/my-hero-access-control repository on GitHub; these links point at the commit this page was built from.
My hero access control: common questions
How many components are on the My hero access control?
8 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the My hero access control design files?
From the jineshpb/my-hero-access-control repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.
Can I use the My hero access control design in my own project?
The repository has no license, so all rights stay with jineshpb. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k