CO60
jmdaly·CO60
About the CO60 PCB
CO60 is an open source STM32 PCB design by jmdaly, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 285 × 95.1 mm, with 285 components from 38 distinct parts.
Its main chip is the STM32F303CBTX, from the STM32 family. Other key parts include the TLV70233_SOT23-5, NUF2221W1T2G and 74LVC1G34. By type, the board carries 68 diodes, 68 resistors, 27 capacitors, 16 LEDs, 4 ICs and 1 transistor.
It belongs with the keyboards designs in this gallery.
From the project
KiCad design files for the CO60, an open hardware 60% keyboard PCB
The CO60 was developed out of the desire to produce a 60% PCB that appeals to many people and is readily available. CO60 is a portmanteau of Community and 60% keyboard.
The CO60 aims to meet the following design goals:
* Switches oriented such that the LEDs are South-facing, for compatibility with Cherry profile keycaps.
* USB Type-C support in both A to C and C to C configurations.
Main components on the CO60
CO60 bill of materials (BOM)
285 components, 38 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F303CBTX STM32F303CBTx | LQFP-48_7x7mm_Pitch0.5mm | U1 |
| 1 | TLV70233_SOT23-5 | SOT-23-5 | U2 |
| 1 | NUF2221W1T2G | SOT-363 | U3 |
| 1 | 74LVC1G34 | SOT-353_SC-70-5 | U4 |
| 1 | FMMT493TA Diodes Incorporated | SOT-23-3 | Q1 |
| 1 | 8MHZ 8MHz | Crystal_SMD_5032-4pin_5.0x3.2mm | Y1 |
| 1 | Conn_01x05_Male | PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | 500MA 500mA | R_0805 | F1 |
| 52 | MX-1U | MXOnly-1U-FLIPPED | K_#0_1, K_#1, K_#2, K_#3, K_#4, K_#5, K_#6, K_#7 +44 |
| 1 | MX-2U | MXOnly-2U-FLIPPED | K_BACK1 |
| 1 | MX-1.75U | MXOnly-1.75U | K_CAPS1 |
| 10 | MX-1.25U | MXOnly-1.25U-FLIPPED | K_CAPS2, K_LALT1, K_LCTL1, K_LGUI1, K_LSHIFT2, K_RALT1, K_RCTL1, K_RFN1 +2 |
| 2 | MX-2.25U | MXOnly-2.25U-FLIPPED | K_ENTER1, K_LSHIFT1 |
| 1 | MX-ISO | MXOnly-ISO-ROTATED-ReversedStabilizers | K_ISOENTER1 |
| 4 | MX-1.5U | MXOnly-1.5U | K_LALT2, K_LCTL2, K_RCTL3, K_SPACE2_4 |
| 6 | MX-1U | MXOnly-1U | K_LGUI2, K_RALT3, K_RCTL2, K_RFN2, K_RFN3, K_RMOD2 |
| 1 | MX-1.25U | MXOnly-1.25U | K_RMOD1 |
| 3 | MX-1.5U | MXOnly-1.5U-FLIPPED | K_RMOD3, K_TAB1, K_\1 |
| 1 | MX-2.75U | MXOnly-2.75U-FLIPPED | K_RSHIFT1 |
| 1 | MX-1.75U | MXOnly-1.75U-FLIPPED | K_RSHIFT2 |
Show 18 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | MX-2.25U | MXOnly-2.25U-ReversedStabilizers | K_SPACE1_1, K_SPACE3_2 |
| 2 | MX-2.75U | MXOnly-2.75U-FLIPPED-ReversedStabilizers | K_SPACE1_2, K_SPACE3_1 |
| 2 | MX-2.75U | MXOnly-2.75U-ReversedStabilizers | K_SPACE1_3, K_SPACE3_3 |
| 1 | MX-6.25U | MXOnly-6.25U-ReversedStabilizers | K_SPACE2_2 |
| 1 | MX-7U | MXOnly-7U-ReversedStabilizers | K_SPACE2_3 |
| 2 | 470 | R_0603_1608Metric | RC1, RC9 |
| 2 | 5.1K 5.1k | R_0603 | RC6, RC7 |
| 1 | 10K 10k | R_0603 | RC8 |
| 1 | SW_Push | SW_SPST_TL3342 | SW1 |
| 1 | HRO-TYPE-C-31-M-12 | HRO-TYPE-C-31-M-12-Assembly | USB1 |
| 16 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | RGB1, RGB2, RGB3, RGB4, RGB5, RGB6, RGB7, RGB8 +8 |
| 68 | 1N4148WTPMS D_Small | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +60 |
| 2 | 30P 30p | C_0603_1608Metric | C1, C2 |
| 20 | 100N 100n | C_0603_1608Metric | C3, C4, C8, C9, C12, C13, C14, C15 +12 |
| 1 | 4.7U 4.7u | C_0603_1608Metric | C5 |
| 3 | 1u | C_0603_1608Metric | C6, C10, C11 |
| 1 | 10N 10n | C_0603_1608Metric | C7 |
| 68 | 560 | R_0603 | R1, R2, R3, R4, R5, R6, R7, R8 +60 |
CO60 design files
The KiCad project lives in the jmdaly/CO60 repository on GitHub; these links point at the commit this page was built from.
- Layoutco60.kicad_pcb
- BOMco60_BOM_.csv
CO60: common questions
What microcontroller does the CO60 use?
The CO60 is built around the STM32F303CBTX, from the STM32 family.
How big is the CO60 PCB?
The CO60 measures 285 × 95.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CO60?
285 components, from 38 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the CO60 design files?
From the jmdaly/CO60 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the CO60 design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which jmdaly chose for the repository.
Can I test firmware for the CO60 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k