Steamvan
jmdaly·steamvan
About the Steamvan PCB
Steamvan is an open source STM32 PCB design by jmdaly, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 243.4 × 76.7 mm, with 187 components from 29 distinct parts.
Its main chip is the STM32F303CBTX, from the STM32 family. Other key parts include the TLV70233_SOT23-5, NUF2221W1T2G and 74LVC1G34. By type, the board carries 46 diodes, 46 resistors, 20 capacitors, 9 LEDs, 4 ICs and 1 transistor.
It belongs with the keyboards designs in this gallery.
From the project
KiCAD design files for the SteamVan PCB - a 40% keyboard PCB based on an STM32 MCU
The SteamVan was developed as a MiniVan-compatible PCB based on an STM32MCU. It does not support hot swap sockets, and it is designed such that the switches are oriented such that the LEDs are South-facing.
The SteamVan aims to meet the following design goals:
* Switches oriented such that the LEDs are South-facing, for compatibility with Cherry profile keycaps.
Main components on the Steamvan
Steamvan bill of materials (BOM)
187 components, 29 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F303CBTX STM32F303CBTx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | TLV70233_SOT23-5 | SOT-23-5 | U2 |
| 1 | NUF2221W1T2G | SOT-363 | U3 |
| 1 | 74LVC1G34 | SOT-353_SC-70-5 | U4 |
| 1 | FMMT493TA Diodes Incorporated | SOT-23-3 | Q1 |
| 1 | 8MHZ 8MHz | Crystal_SMD_5032-4Pin_5.0x3.2mm | Y1 |
| 1 | CONN_01X05_MALE Conn_01x05_Male | PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | 500MA 500mA | R_0805_2012Metric | F1 |
| 36 | MX-1U | MXOnly-1U | K_,1, K_.1, K_/1, K_;1, K_A1, K_B1, K_C1, K_D1 +28 |
| 3 | MX-1.75U | MXOnly-1.75U | K_BACK1, K_LOCK1, K_LSHIFT1 |
| 1 | MX-2.25U | MXOnly-2.25U-ReversedStabilizers | K_ENTER1 |
| 4 | MX-1.25U | MXOnly-1.25U | K_FN1, K_LCTL1, K_RALT1, K_SUPER1 |
| 3 | MX-1.5U | MXOnly-1.5U | K_FN2, K_FN4, K_RSHIFT1 |
| 2 | MX-1U | MXOnly-1U-FLIPPED | K_LCTL2, K_SUPER2 |
| 1 | MX-1.5U | MXOnly-1.5U-FLIPPED | K_RALT2 |
| 1 | MX-2U | MXOnly-2U-ReversedStabilizers | K_SPACE1 |
| 2 | 470 | R_0603_1608Metric | RC1, RC9 |
| 2 | 5.1K 5.1k | R_0603_1608Metric | RC6, RC7 |
| 1 | 10K 10k | R_0603_1608Metric | RC8 |
| 1 | SW_Push | SW_SPST_TL3342 | SW1 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | HRO-TYPE-C-31-M-12 | HRO-TYPE-C-31-M-12-Assembly | USB1 |
| 9 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | RGB1, RGB2, RGB3, RGB4, RGB5, RGB6, RGB7, RGB8 +1 |
| 46 | D | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +38 |
| 2 | 30P 30p | C_0603_1608Metric | C1, C2 |
| 13 | 100N 100n | C_0603_1608Metric | C3, C4, C8, C9, C12, C13, C14, C15 +5 |
| 1 | 4.7U 4.7u | C_0603_1608Metric | C5 |
| 3 | 1u | C_0603_1608Metric | C6, C10, C11 |
| 1 | 10N 10n | C_0603_1608Metric | C7 |
| 46 | 560 | R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8 +38 |
Steamvan design files
The KiCad project lives in the jmdaly/steamvan repository on GitHub; these links point at the commit this page was built from.
- Layoutsteamvan.kicad_pcb
- BOMsteamvan_BOM_.csv
Steamvan: common questions
What microcontroller does the Steamvan use?
The Steamvan is built around the STM32F303CBTX, from the STM32 family.
How big is the Steamvan PCB?
The Steamvan measures 243.4 × 76.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Steamvan?
187 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Steamvan design files?
From the jmdaly/steamvan repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Steamvan design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which jmdaly chose for the repository.
Can I test firmware for the Steamvan without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k