Connectivity module public
jmendoza-10·connectivity-module-public·hardware/kicad/pcie_switch.kicad_sch
About the Connectivity module public
Connectivity module public is an open source PCB design by jmendoza-10, published on GitHub. It is a board, with 98 components from 22 distinct parts.
Other key parts include the PI7C9X3G606GPAEX (GPQ = AEC-Q100 option), TI SN74LVC1G07DCKR, 25AA640A and PCA9306DCUR. By type, the board carries 49 resistors, 37 capacitors, 4 ICs, 4 diodes, 3 inductors and 1 connector.
It belongs with the rf & radio designs in this gallery.
From the project
Triple-modem 5G WWAN carrier (personal project, pre-hardware)
Hierarchical schematic: a root sheet plus 8 child sheets. It was generated by hardware/generator/ (rev 0.1: genv1/design.py`) from pin tables transcribed out of the datasheets.
- ERC (kicad-cli sch erc --severity-all, KiCad 9.0.2): 0 errors, 0 warnings. - Netlist sanity (../generator/netcheck.py): PASS. 464 components. - PDF: ../wwan-carrier-schematic-rev0.3.pdf. Previews: ../diagrams/preview-{root,power-input,pcie,slot1,control}.png.
Main components on the Connectivity module public
Connectivity module public bill of materials (BOM)
98 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PI7C9X3G606GPAEX (GPQ = AEC-Q100 option) PI7C9X3G606GP | LFBGA-144_10x10mm_Layout12x12_P0.8mm | U301 |
| 1 | TI SN74LVC1G07DCKR SN74LVC1G07DCKR | SOT-353_SC-70-5 | U302 |
| 1 | 25AA640A-I/SN (1.8V, 2-byte addr) VERIFY vs switch EEPROM format 25AA640A | SOIC-8_3.9x4.9mm_P1.27mm | U303 |
| 1 | PCA9306DCUR | VSSOP-8_2.3x2mm_P0.5mm | U304 |
| 1 | PCIe x1 edge fingers | BUS_PCIexpress_x1 | J301 |
| 4 | Kingbright APHHS1005SURCK (low Vf red) VERIFY red | LED_0603_1608Metric | D301, D302, D303, D304 |
| 3 | Murata BLM18PG221SN1D BLM18PG221SN1D | L_0603_1608Metric | FB301, FB302, FB303 |
| 8 | Murata GRM/GCM, TDK C/CGA or KEMET (X7R; C0G below 10nF) - no PRC brands 220nF | C_0201_0603Metric | C301, C302, C304, C305, C306, C307, C308, C309 |
| 9 | Murata GRM/GCM, TDK C/CGA or KEMET (X7R; C0G below 10nF) - no PRC brands 100nF | C_0402_1005Metric | C303, C310, C311, C328, C330, C331, C333, C335 +1 |
| 12 | Murata GRM/GCM, TDK C/CGA or KEMET (X7R; C0G below 10nF) - no PRC brands 100nF | C_0201_0603Metric | C312, C313, C314, C315, C316, C317, C318, C319 +4 |
| 3 | Murata GRM/GCM, TDK C/CGA or KEMET (X7R; C0G below 10nF) - no PRC brands 10uF/6.3V | C_0603_1608Metric | C324, C325, C326 |
| 1 | Murata GRM/GCM, TDK C/CGA or KEMET (X7R; C0G below 10nF) - no PRC brands 22uF/6.3V | C_0805_2012Metric | C327 |
| 2 | Murata GRM/GCM, TDK C/CGA or KEMET (X7R; C0G below 10nF) - no PRC brands 1uF | C_0402_1005Metric | C329, C334 |
| 2 | Murata GRM/GCM, TDK C/CGA or KEMET (X7R; C0G below 10nF) - no PRC brands 10uF/6.3V | C_0402_1005Metric | C332, C337 |
| 8 | Yageo RC0402FR-0749R9L (alt Panasonic ERJ / Vishay CRCW, 1%) 49.9 | R_0402_1005Metric | R301, R302, R308, R309, R312, R313, R316, R317 |
| 1 | Yageo RC0402FR-07100KL (alt Panasonic ERJ / Vishay CRCW, 1%) 100k | R_0402_1005Metric | R303 |
| 17 | Yageo RC0402FR-075K1L (alt Panasonic ERJ / Vishay CRCW, 1%) 5.1k | R_0402_1005Metric | R304, R325, R326, R327, R328, R329, R330, R331 +9 |
| 1 | Yageo RC0402FR-07200RL (alt Panasonic ERJ / Vishay CRCW, 1%) 200R 1% | R_0402_1005Metric | R305 |
| 9 | Yageo RC0402JR-070RL (0R jumper) 0 | R_0402_1005Metric | R306, R307, R310, R311, R314, R315, R342, R343 +1 |
| 8 | Yageo RC0402FR-07330RL (alt Panasonic ERJ / Vishay CRCW, 1%) 330 | R_0402_1005Metric | R318, R319, R320, R321, R322, R323, R324, R341 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | Yageo RC0402FR-07680RL (alt Panasonic ERJ / Vishay CRCW, 1%) 680 | R_0402_1005Metric | R345, R346, R347, R348 |
| 1 | Yageo RC0402FR-07200KL (alt Panasonic ERJ / Vishay CRCW, 1%) 200k | R_0402_1005Metric | R349 |
Connectivity module public design files
The KiCad project lives in the jmendoza-10/connectivity-module-public repository on GitHub; these links point at the commit this page was built from.
Connectivity module public: common questions
How many components are on the Connectivity module public?
98 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Connectivity module public design files?
From the jmendoza-10/connectivity-module-public repository on GitHub, which has the schematic, a netlist and the BOM; the links under Design files point to each one.
Can I use the Connectivity module public design in my own project?
The repository has no license, so all rights stay with jmendoza-10. Use it as a reference, and ask the author before reusing the design.
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568