22 open source boards using the PCA9306DCUR
Real designs built with the PCA9306DCUR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Rtcl tp25k usb3
ryuz
80 × 35 mm91 parts4LNo license5STM32
Motherboard
Brickteam-RO
100 × 100 mm84 parts2LMIT4PicoDAC
Person-0
35.1 × 58.3 mm42 parts4LNo license2WPT-01-TRANSMITTER
SasataniLab
70 × 85 mm185 parts4LAGPL-3.00ESP32
LumaDD
xeno3dev
191.9 × 92.3 mm150 parts2LCC-BY-NC-4.00ESP32
IoT Logger B
WestianPKl
94.7 × 71.8 mm135 parts2LNo license0ESP32
IoT Logger B
WestianPKl
94.7 × 71.8 mm135 parts2LNo license0AVR/Arduino
Whisker
HeyPCB
64.6 × 55.2 mm112 parts4LCERN-OHL-S-2.00RP2040/RP2350
Picoarc
naorunaoru
50 × 20 mm51 parts4LMIT0ESP32
Smove r2-main
okbrainhq
25 × 30 mm48 parts4LMIT0- schematic only · 98 parts
Connectivity module public
jmendoza-10
98 partsNo license0 STM32
Projected
jonnor
28 × 28 mm43 parts2LNo license43ESP32
RC14
AgOpenGPS-Official
145 × 108 mm88 parts2LGPL-3.020STM32
Sci board
MatthiasGeorgImhof
80 × 80 mm197 parts4LCC-BY-NC-4.00ESP32
IoT Logger C
WestianPKl
94.7 × 71.8 mm97 parts2LNo license0ESP32
Faf335b recovered
okbrainhq
25 × 30 mm46 parts4LMIT0Nose board
AndreiVladescu
60.3 × 28.8 mm33 parts4LCERN-OHL-S-2.00ESP32
Freerouting rejected-3-opens-In1
okbrainhq
25 × 30 mm46 parts4LMIT0Device Board
WestianPKl
94.7 × 71.8 mm104 parts2LNo license0ESP32
Manual refilled-15-opens
okbrainhq
25 × 30 mm46 parts4LMIT0ESP32
IoT Logger C
WestianPKl
94.7 × 71.8 mm97 parts2LNo license0RP2040/RP2350
Main Board
WestianPKl
107.5 × 69.8 mm51 parts2LNo license0
How designs wire the PCA9306DCUR
Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the PCA9306DCUR connects to, and the resistors, capacitors and other passives placed on it.
- The SCL1_3 pin has a pull-up to 3.3V on 12 of 14 designs, most often 4.7 kΩ (then 2.2 kΩ).
- The SDA1_4 pin has a pull-up to 3.3V on 12 of 14 designs, most often 4.7 kΩ (then 2.2 kΩ).
- The SDA2_5 pin has a pull-up to 5V on 12 of 14 designs, most often 4.7 kΩ (then 2.2 kΩ).
- The SCL2_6 pin has a pull-up to 5V on 12 of 14 designs, most often 4.7 kΩ (then 2.2 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GND_1pin 1 | Connected to: GND 100% | — |
| VREF1_2pin 2 | Connected to: 3.3V 100% |
|
| SCL1_3pin 3 | Connected to: The microcontroller 36% |
|
| SDA1_4pin 4 | Connected to: The microcontroller 36% |
|
| SDA2_5pin 5 | Connected to: A connector 50%, the microcontroller 29% |
|
| SCL2_6pin 6 | Connected to: A connector 50%, the microcontroller 29% |
|
| VREF2_7pin 7 | Connected to: Signal 86% |
|
| EN_8pin 8 | Connected to: Signal 86% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Projected by jonnor, RC14 by AgOpenGPS-Official, Rtcl tp25k usb3-pcb by ryuz and Motherboard by Brickteam-RO.
The PCA9306DCUR in open source designs
The gallery holds 22 open source boards using the PCA9306DCUR from 15 GitHub repositories; a typical one measures about 80 × 69.8 mm and carries around 90 components.
52% use four copper layers or more, and 45% carry an open source license.
The most starred is Projected by jonnor.
Parts used alongside the PCA9306DCUR
Microcontrollers on boards using the PCA9306DCUR
What boards using the PCA9306DCUR are built for
PCA9306DCUR: common questions
Where can I find a PCA9306DCUR reference design?
Each of the 22 boards on this page is a real design using the PCA9306DCUR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the PCA9306DCUR SCL1_3 pin?
The SCL1_3 pin has a pull-up to 3.3V on 12 of 14 designs, most often 4.7 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 14 open source designs using the PCA9306DCUR.
What pull-up resistor is used on the PCA9306DCUR SDA1_4 pin?
The SDA1_4 pin has a pull-up to 3.3V on 12 of 14 designs, most often 4.7 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 14 open source designs using the PCA9306DCUR.
What pull-up resistor is used on the PCA9306DCUR SDA2_5 pin?
The SDA2_5 pin has a pull-up to 5V on 12 of 14 designs, most often 4.7 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 14 open source designs using the PCA9306DCUR.
What parts are used alongside the PCA9306DCUR?
The USBLC6-2SC6, CH340C, AP2112K-3.3TRG1, AP63200WU and ATmega328PB-A appear in the most repositories here.
Which microcontrollers do boards using the PCA9306DCUR use?
Most are built on ESP32 (10), STM32 (3), RP2040/RP2350 (2) and AVR/Arduino (1).
How big is a typical board using the PCA9306DCUR?
The median is 80 × 69.8 mm, and 48% are two-layer designs.
What is the most popular open source board using the PCA9306DCUR?
By GitHub stars, Projected by jonnor, with 43 stars.
Can I simulate one of these boards using the PCA9306DCUR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.