COUNTER V01
jmos1·COUNTER_V01
About the COUNTER V01 PCB
COUNTER V01 is an open source PCB design by jmos1, published on GitHub. It is a 2-layer board measuring 160 × 68.6 mm, with 53 components from 23 distinct parts.
Other key parts include the SG531P, 4017, SN74LS74, 4060 and NE555. By type, the board carries 19 resistors, 6 ICs, 6 capacitors, 5 diodes, 4 switches and 1 connector.
It belongs with the displays & leds designs in this gallery.
From the project
The BOM, schematic PDF, and gerber files are all accessible in the 'Outputs/' folder. Other project files are not included because they add clutter and can be generated from the project itself in KiCad. Thanks.
Main components on the COUNTER V01
COUNTER V01 bill of materials (BOM)
53 components, 23 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SG531P | SOCKET_DIP-8_7.62mm_Conn | U1 |
| 1 | 4017 | CD4017BM96 | U2 |
| 1 | SN74LS74 | SN74LS74ADR | U3 |
| 1 | 4060 | CD4060BM96 | U5 |
| 1 | NE555 | NE555PSR | U6 |
| 1 | LM7805MPX_NOPB | SOT-223 | U7 |
| 1 | Barrel_Jack | BarrelJack_CUI_PJ-102AH_Horizontal | J1 |
| 6 | SC56-21GWA | SC56-21GWA | 7seg_milli1, 7seg_milli2, 7seg_min1, 7seg_min2, 7seg_sec1, 7seg_sec2 |
| 1 | EG1218 | EG1218 | S1 |
| 1 | Stop | SW_B3FS-1010P | SW1 |
| 1 | Start | SW_B3FS-1010P | SW2 |
| 1 | Reset | SW_B3FS-1010P | SW3 |
| 6 | 4026B | CD4026BNSR | milli1, milli2, min1, min2, sec1, sec2 |
| 4 | D | D_DO-41_SOD81_P7.62mm_Horizontal | D1, D2, D3, D4 |
| 1 | GRN | LED_1206_3216Metric_Castellated | D5 |
| 1 | 1uf | CAPC2012X140N | C1 |
| 1 | 10uf | CAPC3216X110N | C2 |
| 2 | .01uf | CAPC1608X90 | C3, C5 |
| 2 | 10uf | CAPAE430X550N | C4, C6 |
| 11 | 1K | RESC2012X70N | R1, R2, R3, R5, R6, R13, R14, R15 +3 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 220 | RESC1608X55N | R4 |
| 6 | 120 | RESC1608X55N | R7, R9, R11, R18, R20, R22 |
| 1 | 10K | RESC3216X70N | R28 |
COUNTER V01 design files
The KiCad project lives in the jmos1/COUNTER_V01 repository on GitHub; these links point at the commit this page was built from.
COUNTER V01: common questions
How big is the COUNTER V01 PCB?
The COUNTER V01 measures 160 × 68.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the COUNTER V01?
53 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the COUNTER V01 design files?
From the jmos1/COUNTER_V01 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the COUNTER V01 design in my own project?
The repository has no license, so all rights stay with jmos1. Use it as a reference, and ask the author before reusing the design.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k