Freq Gen MCU M0
joemadeus·electronica·Freq_Gen_MCU/Freq_Gen_MCU_M0.kicad_pcb
About the Freq Gen MCU M0 PCB
Freq Gen MCU M0 is an open source Microchip SAM PCB design by joemadeus, published on GitHub. It is a 2-layer board measuring 79.8 × 38.8 mm, with 54 components from 30 distinct parts.
Its main chip is the ATSAML21E15B-AUT, from the Microchip SAM family. By type, the board carries 1 IC and 1 LED.
From the project
A collection of circuits and similar
Main components on the Freq Gen MCU M0
Freq Gen MCU M0 bill of materials (BOM)
54 components, 30 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATSAML21E15B-AUT | TQFP-32_7x7mm_P0.8mm | U1 |
| 9 | 100n | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | ADJ_C0, ADJ_C1, ADJ_C2, CLK_C1, CLK_C2, PWR_C5, VDDANA_C1, VDDCORE_C2 +1 |
| 6 | 1k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | ADJ_R0, ADJ_R1, ADJ_R2, BAT_R2, DEBUG_R1, PWR_R2 |
| 3 | SW_Push | SW_CuK_EP11SD1A | ADJ_SW0, ADJ_SW1, ADJ_SW2 |
| 2 | 4.7u | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | BAT_C1, BAT_C2 |
| 3 | Conn_01x02 | PinHeader_1x02_P1.27mm_Vertical | BAT_LED1, PWR_CONN1, PWR_LED1 |
| 1 | 5k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | BAT_R1 |
| 1 | MCP73831-2-OT | SOT-23-5 | BAT_U1 |
| 1 | SI5351A | MSOP-10_3x3mm_P0.5mm | CLK_U1 |
| 1 | Crystal_GND24 | Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | CLK_Y1 |
| 1 | CONN_BAT | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | CONN_BAT1 |
| 1 | USB | USB_Micro-B_Wuerth_629105150521_CircularHoles | CONN_USB1 |
| 1 | Conn_02x05_Odd_Even | PinHeader_2x05_P1.27mm_Vertical | DEBUG_J1 |
| 1 | 6.8 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | HELLO_R1 |
| 1 | Conn_01x04 | PinHeader_1x04_P1.27mm_Vertical | I2C_J1 |
| 2 | 4.7k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | I2C_R1, I2C_R2 |
| 2 | 15p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | LO_C1, LO_C4 |
| 2 | 36p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | LO_C2, LO_C3 |
| 1 | LO | SMA_Jack_Horizontal | LO_CONN1 |
| 2 | 68n | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | LO_L1, LO_L3 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 82n | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | LO_L2 |
| 1 | 220u | CP_Radial_D6.3mm_P2.50mm | PWR_C1 |
| 3 | 1u | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | PWR_C2, PWR_C3, VDDCORE_C1 |
| 1 | 10u | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | PWR_C4 |
| 1 | D_Schottky | D_SOD-123F | PWR_D1 |
| 1 | DMG2301L | SOT-23_Handsoldering | PWR_Q1 |
| 1 | 10k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | PWR_R1 |
| 1 | AP2112K-3.3 | SOT-23-5 | PWR_U1 |
| 1 | TPD3E001DRLR | SOT-553 | PWR_U2 |
| 1 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | HELLO_D1 |
Freq Gen MCU M0 design files
The KiCad project lives in the joemadeus/electronica repository on GitHub; these links point at the commit this page was built from.
Freq Gen MCU M0: common questions
What microcontroller does the Freq Gen MCU M0 use?
The Freq Gen MCU M0 is built around the ATSAML21E15B-AUT, from the Microchip SAM family.
How big is the Freq Gen MCU M0 PCB?
The Freq Gen MCU M0 measures 79.8 × 38.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Freq Gen MCU M0?
54 components, from 30 distinct parts. The full bill of materials is listed on this page.
Where can I download the Freq Gen MCU M0 design files?
From the joemadeus/electronica repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Freq Gen MCU M0 design in my own project?
The repository has no license, so all rights stay with joemadeus. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Freq Gen MCU M0 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
More boards in electronica
Microchip SAM
LED MCU
joemadeus
50 × 50 mm72 parts2LNo license1NEMA0183
joemadeus
50.8 × 27.7 mm51 parts2LNo license1Freq Gen MCU
joemadeus
80 × 39 mm46 parts2LNo license1AISFilterAmp
joemadeus
40 × 39 mm26 parts2LNo license1RF Filters-Straight
joemadeus
42.7 × 24.2 mm25 parts2LNo license1RF Filters
joemadeus
42.7 × 12.3 mm25 parts2LNo license1RF Filters-B-SMA-SMA
joemadeus
42.7 × 12.5 mm16 parts2LNo license1RF Filters-B-TH-SMA
joemadeus
42 × 12.5 mm15 parts2LNo license1RF Filters-B-uFl uFl
joemadeus
42.7 × 12.5 mm14 parts2LNo license1USB Power Filter
joemadeus
27.7 × 12 mm10 parts2LNo license15o Pass
joemadeus
51.8 × 10.3 mm5 parts2LNo license1
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416