Guitar-Amp-Project
Joey-Regan·Guitar-Amp-Project
About the Guitar-Amp-Project PCB
Guitar-Amp-Project is an open source PCB design by Joey-Regan, published on GitHub. It is a board, with 11 components from 9 distinct parts.
By type, the board carries 5 resistors, 3 capacitors, 2 transistors and 1 speaker.
It belongs with the audio designs in this gallery.
From the project
A fully custom solid-state guitar amplifier designed from the ground up in KiCad. The amp integrates a classic analog signal chain — preamp, tone stack, and power amp — with a microcontroller-driven effects engine covering everything from compression and EQ to chorus, delay, and
A fully custom solid-state guitar amplifier designed from the ground up in KiCad. The amp integrates a classic analog signal chain — preamp, tone stack, and power amp — with a microcontroller-driven effects engine covering everything from compression and EQ to chorus, delay, and reverb.
Amp Controls - Gain / Volume - 3-band tone stack: Treble, Mid, Bass - Clean / Drive channel switching
Guitar-Amp-Project bill of materials (BOM)
11 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 2N3904 | TO-92_Inline | Q1, Q2 |
| 1 | Speaker | LS1 | |
| 2 | 22μF | C1, C2 | |
| 1 | 220μF | C3 | |
| 1 | 4.7k | R1 | |
| 1 | 12k | R2 | |
| 1 | 6.8k | R3 | |
| 1 | 10k | R4 | |
| 1 | 1k | R5 |
Guitar-Amp-Project design files
The KiCad project lives in the Joey-Regan/Guitar-Amp-Project repository on GitHub; these links point at the commit this page was built from.
- SchematicEvoProject.kicad_sch
Guitar-Amp-Project: common questions
How many components are on the Guitar-Amp-Project?
11 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Guitar-Amp-Project design files?
From the Joey-Regan/Guitar-Amp-Project repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Guitar-Amp-Project design in my own project?
The repository has no license, so all rights stay with Joey-Regan. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687