4 open source boards using the GD25Q16CTIGR

Real designs built with the GD25Q16CTIGR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The GD25Q16CTIGR in open source designs

The gallery holds 4 open source boards using the GD25Q16CTIGR from 3 GitHub repositories; a typical one measures about 85 × 115 mm and carries around 47 components.

75% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.

The most starred is OSO-BOOK-B1 by joeycastillo.

Parts used alongside the GD25Q16CTIGR

Microcontrollers on boards using the GD25Q16CTIGR

What boards using the GD25Q16CTIGR are built for

GD25Q16CTIGR: common questions

Where can I find a GD25Q16CTIGR reference design?

Each of the 4 boards on this page is a real design using the GD25Q16CTIGR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the GD25Q16CTIGR?

The MEM2075-00-140-01-A, OSO-BOOK-C2-01 and SC0918 appear in the most repositories here.

Which microcontrollers do boards using the GD25Q16CTIGR use?

Most are built on ESP32 (2) and RP2040/RP2350 (2).

How big is a typical board using the GD25Q16CTIGR?

The median is 85 × 115 mm, and 75% are two-layer designs.

What is the most popular open source board using the GD25Q16CTIGR?

By GitHub stars, OSO-BOOK-B1 by joeycastillo, with 8,091 stars.

Can I simulate one of these boards using the GD25Q16CTIGR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part