OpticalAbsorptionMeasurement before
Johann-Schmid·opticalAbsorptionMeasurement
About the OpticalAbsorptionMeasurement before PCB
OpticalAbsorptionMeasurement before is an open source PCB design by Johann-Schmid, published on GitHub. It is a 2-layer board measuring 166 × 160 mm, with 159 components from 24 distinct parts.
Other key parts include the TDR_3-0523SM, OPA602AU, AD5293, L7812 and L7912. By type, the board carries 78 capacitors, 37 resistors, 24 ICs, 9 diodes, 7 connectors and 4 transistors.
It belongs with the test & measurement designs in this gallery.
From the project
Schematic and Board of the Optical Absorptions Measurement Device OAMD

Main components on the OpticalAbsorptionMeasurement before
OpticalAbsorptionMeasurement before bill of materials (BOM)
159 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TDR_3-0523SM | TDR_3SM | U1 |
| 16 | OPA602AU | SO-8_3.9x4.9mm_P1.27mm | U2, U3, U8, U9, U11, U12, U13, U14 +8 |
| 4 | AD5293 | TSSOP-14_4.4x5mm_P0.65mm | U4, U5, U17, U18 |
| 1 | L7812 | TO-220-3_Vertical | U6 |
| 1 | L7912 | TO-220-3_Vertical | U7 |
| 1 | ADR01 | SOIC-8_3.9x4.9mm_P1.27mm | U10 |
| 4 | J111 | TO92 | Q1, Q2, Q3, Q4 |
| 1 | Conn_01x02_Male | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Conn_02x04_Counter_Clockwise | PinHeader_2x04_P2.54mm_Vertical | J2 |
| 4 | Conn_01x03_Male | PinHeader_1x03_P2.54mm_Vertical | J3, J4, J5, J6 |
| 1 | Conn_01x04_Male | PinHeader_1x04_P2.54mm_Vertical | J7 |
| 4 | D_Photo | Osram_SFH205 | D1, D2, D3, D4 |
| 5 | LED | LED_D5.0mm | D5, D6, D7, D8, D9 |
| 4 | 1u | CP_Elec_4x5.8 | C1, C20, C21, C60 |
| 51 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4, C5, C6, C7, C8, C9, C10 +43 |
| 5 | 100u | CP_Elec_10x14.3 | C3, C18, C19, C22, C23 |
| 14 | 10u | CP_Elec_4x5.8 | C14, C15, C16, C17, C28, C29, C34, C40 +6 |
| 4 | 15u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C42, C45, C73, C76 |
| 4 | 10M | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R17, R18 |
| 8 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R5, R6, R20, R21, R25, R26 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 19 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8, R9, R10, R11, R12, R13, R14 +11 |
| 4 | 50 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R19, R22, R23, R24 |
| 1 | 1,6k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R33 |
| 1 | R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R37 |
OpticalAbsorptionMeasurement before design files
The KiCad project lives in the Johann-Schmid/opticalAbsorptionMeasurement repository on GitHub; these links point at the commit this page was built from.
OpticalAbsorptionMeasurement before: common questions
How big is the OpticalAbsorptionMeasurement before PCB?
The OpticalAbsorptionMeasurement before measures 166 × 160 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the OpticalAbsorptionMeasurement before?
159 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the OpticalAbsorptionMeasurement before design files?
From the Johann-Schmid/opticalAbsorptionMeasurement repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the OpticalAbsorptionMeasurement before design in my own project?
The repository has no license, so all rights stay with Johann-Schmid. Use it as a reference, and ask the author before reusing the design.
More boards in opticalAbsorptionMeasurement
Similar boards
AnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kStackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kEleLab v2 Frontpanel a
Chrismettal
88 × 25 mm23 parts2LGPL-3.0528EleLab v2 Bus150
Chrismettal
150 × 50 mm37 parts2LGPL-3.0528EleLab v2 PowerFeed
Chrismettal
68 × 50 mm11 parts2LGPL-3.0528