61 open source boards using the L7812
Real designs built with the L7812, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RadioThermal Soldering OSHW
RadioThermal
100 × 75 mm54 parts2LCERN-OHL-P-2.078LittleSixteen
SukkoPera
389 × 136.2 mm329 parts2LCustom license76Psoc5power
profdc9
96.8 × 97 mm133 parts2LNo license56Eurorack psu
polykit
117 × 72 mm30 parts2LNo license37Asteroids
nmikstas
290.8 × 482.6 mm490 parts2LNo license23RP2040/RP2350
AWG
F6ITU
140 × 75 mm73 parts2LNo license14Atfblast
UzixLS
88.8 × 42.8 mm32 parts2LMIT8PIC
YAPSCO-10V
simonjoh
82.8 × 73.2 mm72 parts2LGPL-3.07RP2040/RP2350
HF-PA-v10
kholia
90 × 99.9 mm97 parts2LGPL-3.06MiniWhip
oe2lsp
40.3 × 44.2 mm40 parts2LGPL-2.06FullCapacitorBankAdapter
gongminmin
116.8 × 61 mm43 parts2LMIT4PIC
Nice flor s decoder for pic
f1iwq2
45 × 53 mm43 parts2LNo license2Psoc5power
iduwhux
96.8 × 97 mm133 parts2LNo license1AVR/Arduino
Rpi with supply
cnlohr
65 × 56 mm39 parts2LMIT1PSU linear reg
matterwaves
100 × 40 mm24 parts2LNo license1Simple-12V-Regulated-Power-Supply
Onuryrtsvr
124 × 91 mm13 parts2LMIT1- schematic only · 25 parts
Stereo-Plasma-Speaker
Firestorm108
25 partsNo license1 SloRectoTwin
megaumnick
268.5 × 74.3 mm236 parts2LNo license0AVR/Arduino
AmplifierBoard
dangrie158
210 × 104 mm225 parts2LMIT0OpticalAbsorptionMeasurement before
Johann-Schmid
166 × 160 mm159 parts2LNo license0Dac circ
b3dag
193 × 160 mm149 parts2LNo license0KIKAD
MUBARIS-KT
263.3 × 128 mm133 parts2LNo license0Usbpd adapter
fachat
108.5 × 69.9 mm128 parts2LNo license0Probador - Modulo Principal
Gonzalogontad
100 × 70 mm104 parts2LNo license0DIY-amplifier
adamkral20-svg
90.9 × 71.6 mm91 parts4LNo license0ESP32
Neo
IstratieStefan
119.1 × 121 mm80 parts2LMIT0Https github.com bejaouihamza-IR-Interruption-Detector
bejaouihamza
106.1 × 110.1 mm71 parts2LNo license0Dvojity laboratorni zdroj-30V-3.5A
RichardRozehnal
114.2 × 100 mm69 parts2LGPL-3.00Analog audio visualizer
alimleahat
130 × 100 mm65 parts2LNo license0Bachelor thesis
dario0603
99 × 99 mm57 parts2LNo license0AVR/Arduino
Minesweeper
Shawky-MAHa
116.3 × 144.3 mm48 parts2LNo license03APSU
codesqueak
178 × 127 mm45 parts2LCERN-OHL-S-2.00Kicad trans pwr
s59mz
86.4 × 95.3 mm34 parts2LGPL-3.00ESP8266
Lampu v1
mekatronik-achmadi
77 × 86 mm27 parts2LNo license0GitHub2
NaraenderHardware
33.5 × 30 mm22 parts2LMIT0Simple-12V-Regulated-Power-Supply
Korrieclanging201
124 × 91 mm13 parts2LMIT0
How designs wire the L7812
Read from the KiCad layouts of 47 open source designs, one per repository: what each pin of the L7812 connects to, and the resistors, capacitors and other passives placed on it.
- The IN pin has a capacitor to GND on 34 of 47 designs, most often 100 nF (then 330 nF).
- The OUT pin is tied to 12V on 34 of 47 designs (a signal on 12).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INpin 1 | Connected to: Signal 64% · 24V 36% |
|
| GNDpin 2 | Connected to: GND 91% | — |
| OUTpin 3 | Connected to: 12V 72% · a signal 26% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include RadioThermal Soldering OSHW by RadioThermal, LittleSixteen by SukkoPera, Psoc5power by profdc9 and GradientDriver by xecus.
The L7812 in open source designs
The gallery holds 61 open source boards using the L7812 from 52 GitHub repositories; a typical one measures about 107.2 × 79 mm and carries around 54 components.
95% are two-layer designs, the rest use four layers or more, and 39% carry an open source license.
The most starred is RadioThermal Soldering OSHW by RadioThermal.
Parts used alongside the L7812
Microcontrollers on boards using the L7812
What boards using the L7812 are built for
L7812: common questions
Where can I find a L7812 reference design?
Each of the 61 boards on this page is a real design using the L7812. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the L7812 IN pin connected?
The IN pin has a capacitor to GND on 34 of 47 designs, most often 100 nF (then 330 nF). Counted from the KiCad layouts of 47 open source designs using the L7812.
How is the L7812 OUT pin connected?
The OUT pin is tied to 12V on 34 of 47 designs (a signal on 12). Counted from the KiCad layouts of 47 open source designs using the L7812.
What parts are used alongside the L7812?
The L7805, L7912, L7905, 74HC14 and AMS1117-3.3 appear in the most repositories here.
Which microcontrollers do boards using the L7812 use?
Most are built on AVR/Arduino (5), ESP32 (4), PIC (3) and RP2040/RP2350 (2).
How big is a typical board using the L7812?
The median is 107.2 × 79 mm, and 95% are two-layer designs.
What is the most popular open source board using the L7812?
By GitHub stars, RadioThermal Soldering OSHW by RadioThermal, with 78 stars.
Can I simulate one of these boards using the L7812 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.