Fab computer hackerfab
jonahsaunders·fab-computer-hackerfab·hardware/backplane/HackerfabBackplane.kicad_pcb
About the Fab computer hackerfab PCB
Fab computer hackerfab is an open source PCB design by jonahsaunders, published on GitHub. It is a 2-layer board measuring 101.7 × 78.1 mm, with 80 components from 28 distinct parts.
Other key parts include the TPS5450DDAR, AP2112K-3.3TRG1, USBLC6-2SC6, RP2354B and TPS2116DRL. By type, the board carries 40 capacitors, 19 resistors, 6 ICs, 6 diodes, 3 connectors and 3 inductors.
From the project
Modular RP2354B control backplane for HackerFab equipment. KiCad hardware, shared component libraries, and design documentation.
Open HackerfabBackplane.kicadpro` with KiCad 10.
Keep this directory and ../libraries/ together when copying the project. Standard KiCad libraries are also required. Standard 3D models are optional for circuit editing but needed for a complete 3D preview.
See the schematic previews and validation baseline.
Main components on the Fab computer hackerfab
Fab computer hackerfab bill of materials (BOM)
80 components, 28 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | TPS5450DDAR | Texas_HSOP-8-1EP_3.9x4.9mm_P1.27mm | U1, U2 |
| 1 | AP2112K-3.3TRG1 | SOT-23-5 | U3 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U4 |
| 1 | RP2354B | QFN-80-1EP_10x10mm_P0.4mm_EP3.4x3.4mm | U5 |
| 1 | TPS2116DRL | SOT-583-8 | U6 |
| 1 | 12MHz | generic_xtalcc320x250x80-4 | Y1 |
| 3 | 9001-12961C00A WingTAT | WingTAT_9001-12961C00A_DIN41612_C_3x32_Vertical | J1, J2, J3 |
| 2 | ~ | B3U-1000P | SW1, SW2 |
| 4 | KT-0603R Hubei KENTO Elec | LED_0603_1608Metric | D1, D3, D5, D6 |
| 2 | B540C-13-F | D_SMC | D2, D4 |
| 2 | CDRH127/LDNP-150MC 15uH Sumida | L_Sumida_CDRH127_LD_12.0x12.0mm | L1, L2 |
| 1 | 3.3u | coilcraft_lps4018_dot1 | L3 |
| 6 | 10u 50V | C_1206_3216Metric | C1, C2, C8, C9, C17, C25 |
| 6 | 10n 50V | C_0603_1608Metric | C3, C4, C7, C10, C11, C14 |
| 4 | 217EC0037 220u 25V KNSCHA | CP_Elec_6.3x7.7 | C5, C6, C12, C13 |
| 4 | 1u 25V | C_0603_1608Metric | C15, C16, C37, C38 |
| 14 | 100n 50V | C_0402_1005Metric | C18, C19, C20, C21, C22, C23, C24, C26 +6 |
| 2 | 15p 100V | C_0603_1608Metric | C29, C34 |
| 2 | 4uF 6V3 | C_0603_1608Metric | C32, C36 |
| 2 | 10u 16V | C_0603_1608Metric | C39, C40 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 10k | R_0603_1608Metric | R1, R2, R3, R5, R7 |
| 6 | 1k13 | R_0603_1608Metric | R4, R9, R10, R12, R13, R14 |
| 2 | 0R | R_0603_1608Metric | R6, R11 |
| 1 | 3k16 | R_0603_1608Metric | R8 |
| 2 | 27R | R_0402_1005Metric | R15, R16 |
| 1 | 1k | R_0603_1608Metric | R17 |
| 1 | 330k | R_0603_1608Metric | R18 |
| 1 | 100k | R_0603_1608Metric | R19 |
Fab computer hackerfab design files
The KiCad project lives in the jonahsaunders/fab-computer-hackerfab repository on GitHub; these links point at the commit this page was built from.
Fab computer hackerfab: common questions
How big is the Fab computer hackerfab PCB?
The Fab computer hackerfab measures 101.7 × 78.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Fab computer hackerfab?
80 components, from 28 distinct parts. The full bill of materials is listed on this page.
Where can I download the Fab computer hackerfab design files?
From the jonahsaunders/fab-computer-hackerfab repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Fab computer hackerfab design in my own project?
The repository has no license, so all rights stay with jonahsaunders. Use it as a reference, and ask the author before reusing the design.