61 open source boards using the TPS2116DRL
Real designs built with the TPS2116DRL, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Nordic nRF
PH60
ph-design
285 × 94.6 mm204 parts2LCC-BY-NC-4.0162STM32
Switch main v5
ben5049
93 × 50 mm594 parts6LAGPL-3.024RP2040/RP2350
Flight computer
linguini1
83.7 × 62.9 mm82 parts4LNo license17STM32
Longboi
KungfuPancake
358 × 40 mm285 parts4LApache-2.07Nordic nRF
Dcmini
dcmini-org
127 × 86.5 mm189 parts2LCERN-OHL-P-2.07RP2040/RP2350
Opensync before chb h placement-20260915
ErichZimmer
160 × 100 mm233 parts2LCERN-OHL-S-2.04RP2040/RP2350
Dino z80
rh1tech
99.5 × 80 mm258 parts4LGPL-3.03PIC
YukaLink
Misaka0x2730
94.3 × 81.8 mm235 parts4LGPL-3.03ESP32
Hactar PCB - Finn Berg & Brett Regnier
Quicr
71.5 × 91 mm203 parts4LBSD-2-Clause3RP2040/RP2350
GB-LINK-v1.4
Chisfamily
23.2 × 36.1 mm57 parts4LNo license3AVR/Arduino
SatelliteController2.0
tokai-student-rocket-project
150 × 100 mm221 parts2LMIT2STM32
Glhfkbd
redhotvengeance
296.5 × 103.6 mm130 parts2LMIT2AVR/Arduino
1. PDU
SshgurkiratSingh
149.5 × 113 mm106 parts4LNo license2STM32
Hoppy clock
borkdlabs
35 × 48 mm50 parts4LMIT2RP2040/RP2350
NuBoard IC Investigator
wickerwaka
141.7 × 105.1 mm375 parts6LNo license1Raspberry Pi
Cm5-carrier v2
ben5049
70 × 80 mm294 parts6LAGPL-3.01RP2040/RP2350
IGNRocketOrderFile
wasa-rockoon
170 × 73 mm182 parts2LMIT1ESP32
Bike embedded app
nicolaeandreivasile
66.5 × 92 mm82 parts2LNo license1Fab computer hackerfab
jonahsaunders
101.7 × 78.1 mm80 parts2LNo license1ESP32
Wirelight
kimtore
53.5 × 45.5 mm34 parts2LMIT1STM32
PROMETHEUS
EPFLRocketTeam
115 × 50 mm259 parts4LNo license0Raspberry Pi
ROV PCIE USB HUB FINAL
samnadol
65 × 56.5 mm161 parts4LNo license0Mgc
0x007E
92.7 × 62.2 mm108 parts2LCC-BY-NC-4.00RP2040/RP2350
Rp2040plus devboard
joshujo
40 × 100 mm98 parts4LNo license0ESP32
OpenWatch
willherr72
38.5 × 38.5 mm94 parts4LNo license0STM32
TSUMO BOT hardware
troyodia
97.7 × 58.5 mm93 parts4LNo license0STM32
STM32-Sumo-Robot-Controller
keer-nova74
97.7 × 58.5 mm93 parts4LNo license0ESP32
Dps satelite
UbiTrich
80 × 80 mm92 parts4LNo license0AVR/Arduino
Multicartridge smd-32u4-front dipswitch
ifilot
80 × 100 mm72 parts2LNo license0ESP32
Plant as button
AlBarbe
77.1 × 71 mm58 parts4LNo license0STM32
ANUFS-GearPositionSTM
chithigun23
108.8 × 50.9 mm54 parts4LNo license0ESP32
Ambient air
mawoka-myblock
50 × 35 mm51 parts2LNo license0- schematic only · 47 partsESP32
Smartwatch-HackClub-Fallen-Project
aAhmer1677
47 partsMIT0 RP2040/RP2350
Frank next
rh1tech
99 × 54 mm245 parts4LGPL-3.065RP2040/RP2350
Opensync
ErichZimmer
160 × 100 mm220 parts4LCERN-OHL-S-2.04RP2040/RP2350
Xt8086 beta
rh1tech
99.5 × 80 mm239 parts4LGPL-3.03
How designs wire the TPS2116DRL
Read from the KiCad layouts of 37 open source designs, one per repository: what each pin of the TPS2116DRL connects to, and the resistors, capacitors and other passives placed on it.
- The PR1 pin has a resistor to GND on 30 of 37 designs, most often 10 kΩ (then 100 kΩ).
- The VOUT pins have a decoupling capacitor on 26 of 37 designs, most often 10 µF (then 1 µF).
- The VIN1 pin has a decoupling capacitor on 20 of 37 designs, most often 100 nF (then 10 µF).
- The VIN2 pin has a decoupling capacitor on 20 of 37 designs, most often 1 µF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 95% | — |
| VOUTpin 2, 7 | Connected to: 5V 65% · a signal 32% |
|
| VIN1pin 3 | Connected to: 5V 65% · a signal 32% |
|
| PR1pin 4 | Connected to: Signal 92% |
|
| VIN2pin 6 | Connected to: 3.3V 68% · a signal 30% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PH60 by ph-design, Frank next by rh1tech, Switch main v5 by ben5049 and Flight computer by linguini1.
The TPS2116DRL in open source designs
The gallery holds 61 open source boards using the TPS2116DRL from 39 GitHub repositories; a typical one measures about 98.3 × 80 mm and carries around 173 components.
62% use four copper layers or more, and 62% carry an open source license.
The most starred is PH60 by ph-design.
Parts used alongside the TPS2116DRL
Microcontrollers on boards using the TPS2116DRL
What boards using the TPS2116DRL are built for
TPS2116DRL: common questions
Where can I find a TPS2116DRL reference design?
Each of the 61 boards on this page is a real design using the TPS2116DRL. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the TPS2116DRL PR1 pin?
The PR1 pin has a resistor to GND on 30 of 37 designs, most often 10 kΩ (then 100 kΩ). Counted from the KiCad layouts of 37 open source designs using the TPS2116DRL.
What decoupling capacitors do designs use on the TPS2116DRL VOUT pin?
The VOUT pins have a decoupling capacitor on 26 of 37 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 37 open source designs using the TPS2116DRL.
What decoupling capacitors do designs use on the TPS2116DRL VIN1 pin?
The VIN1 pin has a decoupling capacitor on 20 of 37 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 37 open source designs using the TPS2116DRL.
What parts are used alongside the TPS2116DRL?
The USBLC6-2SC6, AMS1117-3.3, RP2040, W25Q128JVS and AP2112K-3.3 appear in the most repositories here.
Which microcontrollers do boards using the TPS2116DRL use?
Most are built on RP2040/RP2350 (20), ESP32 (18), STM32 (10) and AVR/Arduino (6).
How big is a typical board using the TPS2116DRL?
The median is 98.3 × 80 mm, and 38% are two-layer designs.
What is the most popular open source board using the TPS2116DRL?
By GitHub stars, PH60 by ph-design, with 162 stars.
Can I simulate one of these boards using the TPS2116DRL before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.