USB-to-UART-I2C-pogo pins-
About the USB-to-UART-I2C-pogo pins- PCB
USB-to-UART-I2C-pogo pins- is an open source PCB design by JonathanBheri, published on GitHub. It is a 4-layer board measuring 63.2 × 40.7 mm, with 17 components from 14 distinct parts.
Other key parts include the MCP2221AXP and LD1117V50. By type, the board carries 5 resistors, 4 connectors, 4 capacitors, 2 ICs, 1 switch and 1 diode.
It belongs with the usb & debug tools designs in this gallery.
From the project
This PCB will help with production EOL testing or electrical Functional test (FCT)
Main components on the USB-to-UART-I2C-pogo pins-
USB-to-UART-I2C-pogo pins- bill of materials (BOM)
17 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP2221AXP MCP2221AxP | DIP-14_W7.62mm | U1 |
| 1 | LD1117V50 | TO-220-3_Vertical | U2 |
| 1 | PINHD_1X8_MALE PINHD_1x8_Male | PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4085 | J2 |
| 1 | PINHD_1X9_FEMALE PINHD_1x9_Female | PinSocket_1x09_P2.54mm_Vertical | J3 |
| 1 | CONN_02X04_COUNTER_CLOCKWISE Conn_02x04_Counter_Clockwise | PinHeader_2x04_P2.54mm_Vertical | J5 |
| 1 | 1-1825010-3 | SW_1-1825010-3 | SW1 |
| 1 | LED_BGKR | LED_D5.0mm-4_RGB_Wide_Pins | D1 |
| 1 | 0.47UF 0.47uF | C_Rect_L4.0mm_W2.5mm_P2.50mm | C1 |
| 2 | C_Small | C_Rect_L4.0mm_W2.5mm_P2.50mm | C2, C6 |
| 1 | 100PF 100pF | C_Rect_L4.0mm_W2.5mm_P2.50mm | C7 |
| 1 | 1M 1% | R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R1 |
| 3 | 5.1K 5.1k | R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R2, R3, R5 |
| 1 | 2k | R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R4 |
USB-to-UART-I2C-pogo pins- design files
The KiCad project lives in the JonathanBheri/USB-to-UART-I2C-pogo-pins- repository on GitHub; these links point at the commit this page was built from.
- LayoutSerial_pogo.kicad_pcb
- SchematicSerial_pogo.kicad_sch
- BOMSerial_pogo.csv
USB-to-UART-I2C-pogo pins-: common questions
How big is the USB-to-UART-I2C-pogo pins- PCB?
The USB-to-UART-I2C-pogo pins- measures 63.2 × 40.7 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the USB-to-UART-I2C-pogo pins-?
17 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the USB-to-UART-I2C-pogo pins- design files?
From the JonathanBheri/USB-to-UART-I2C-pogo-pins- repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the USB-to-UART-I2C-pogo pins- design in my own project?
The repository has no license, so all rights stay with JonathanBheri. Use it as a reference, and ask the author before reusing the design.
Similar boards
FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0490
Relatively-Universal-ROM-Programmer
AndersBNielsen
68.8 × 53.6 mm141 parts2LGPL-3.0253
Ovc5
osrf
98 × 97 mm197 parts6LApache-2.0208
Easy pdk programmer hardware
free-pdk
26.7 × 21.6 mm28 parts2LCC-BY-SA-4.0206
27c160-tl866-adapter
mafe72
82.4 × 43.1 mm10 partsGPL-3.0147
STM32 VGM Player YM2612 SN76489
AidanHockey5
138.4 × 91.4 mm84 parts2LAGPL-3.0117