10 open source boards using the MCP2221AXP
Real designs built with the MCP2221AXP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Tom80
anjennings
135 × 100 mm49 parts2LMIT93V9958video
rosco-m68k
106 × 89 mm61 parts4LMIT17AVR/Arduino
AVR488
VE7PMC
86 × 70 mm24 parts2LGPL-3.010AVR/Arduino
Rtty transmitter
bazsimarkus
120 × 60 mm71 parts2LNo license1AVR/Arduino
Eeprom programmer
jkreucher
80 × 80 mm19 parts2LMIT1PIC
EMK310
Boilingtub
80 × 100 mm50 parts2LGPL-2.00AVR/Arduino
Kicad usbc iso avr328
jhugon
73.3 × 45 mm23 parts2LNo license0USB-to-UART-I2C-pogo pins-
JonathanBheri
63.2 × 40.7 mm17 parts4LNo license0UART Unit
oberrow
63.8 × 77.6 mm13 parts2LMIT1Roscram01
rosco-m68k
122 × 104 mm28 parts2LMIT17
How designs wire the MCP2221AXP
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the MCP2221AXP connects to, and the resistors, capacitors and other passives placed on it.
- The VUSB pin has a capacitor to GND on 7 of 9 designs, most often 470 nF (then 22 pF).
- The GP3 pin is left unconnected on 7 of 9 designs (a signal on 2).
- The GP0 pin is left unconnected on 6 of 9 designs (a signal on 3).
- The GP1 pin is left unconnected on 6 of 9 designs (a signal on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1 | Connected to: 5V 78% · a signal 22% |
|
| GP0pin 2 | Connected to: Not connected 67% · a signal 33% | — |
| GP1pin 3 | Connected to: Not connected 67% · a signal 33% | — |
| GP2pin 7 | Connected to: Not connected 67% · a signal 33% | — |
| GP3pin 8 | Connected to: Not connected 78% · a signal 22% | — |
| VUSBpin 11 | Connected to: Signal 89% |
|
| VSSpin 14 | Connected to: GND 89% | — |
7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Tom80 by anjennings, Roscram01 by rosco-m68k, AVR488 by VE7PMC and Rtty transmitter by bazsimarkus.
The MCP2221AXP in open source designs
The gallery holds 10 open source boards using the MCP2221AXP from 9 GitHub repositories; a typical one measures about 83 × 78.8 mm and carries around 26 components.
80% are two-layer designs, the rest use four layers or more, and 70% carry an open source license.
The most starred is Tom80 by anjennings.
Parts used alongside the MCP2221AXP
Microcontrollers on boards using the MCP2221AXP
What boards using the MCP2221AXP are built for
MCP2221AXP: common questions
Where can I find a MCP2221AXP reference design?
Each of the 10 boards on this page is a real design using the MCP2221AXP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MCP2221AXP VUSB pin connected?
The VUSB pin has a capacitor to GND on 7 of 9 designs, most often 470 nF (then 22 pF). Counted from the KiCad layouts of 9 open source designs using the MCP2221AXP.
How is the MCP2221AXP GP3 pin connected?
The GP3 pin is left unconnected on 7 of 9 designs (a signal on 2). Counted from the KiCad layouts of 9 open source designs using the MCP2221AXP.
How is the MCP2221AXP GP0 pin connected?
The GP0 pin is left unconnected on 6 of 9 designs (a signal on 3). Counted from the KiCad layouts of 9 open source designs using the MCP2221AXP.
Which microcontrollers do boards using the MCP2221AXP use?
Most are built on AVR/Arduino (4) and PIC (1).
How big is a typical board using the MCP2221AXP?
The median is 83 × 78.8 mm, and 80% are two-layer designs.
What is the most popular open source board using the MCP2221AXP?
By GitHub stars, Tom80 by anjennings, with 93 stars.
Can I simulate one of these boards using the MCP2221AXP before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.