HardLabs

Keyboard stm32 with copper pour

Jonkaphi·Numerical-Keypad-with-Audio-FX·Hardware/kicad project/Keyboard_stm32_with_copper_pour.kicad_pcb

Keyboard stm32 with copper pour PCB layout, top view — open source STM32 board by Jonkaphi

About the Keyboard stm32 with copper pour PCB

Keyboard stm32 with copper pour is an open source STM32 PCB design by Jonkaphi, published on GitHub under the MIT license. It is a 4-layer board measuring 168.3 × 122.5 mm, with 133 components from 28 distinct parts.

Its main chip is the STM32F072C8Tx, from the STM32 family. Other key parts include the TS02-66-80-BK-160-LCR-D, TPA6102A2DGKR, MIC5504-3.3YM5-TR and USBLC6-2SC6. By type, the board carries 37 diodes, 32 switches, 29 capacitors, 21 resistors, 6 ICs and 3 connectors.

It belongs with the keyboards and audio designs in this gallery.

From the project

The extra little feature of having audio fx being played locally on the keyboard with each button press, was from one of the commenters on reddit related to a post. The sound files will be read from the placed SD card. Currently the audio that can be played is from 8 to 16 kHz kH

The extra little feature of having audio fx being played locally on the keyboard with each button press, was from one of the commenters on reddit related to a post. The sound files will be read from the placed SD card. Currently the audio that can be played is from 8 to 16 kHz kHz sample rate with 16 bit signed PCM.

The lower level sd card interface for the file system used in the project was made by Khaled Magdy in their post on

Keyboard stm32 with copper pour, from the project README
From the project README

Main components on the Keyboard stm32 with copper pour

TS02-66-80-BK-160-LCR-DTPA6102A2DGKRMIC5504-3.3YM5-TRUSBLC6-2SC6STM32F072C8Tx

Keyboard stm32 with copper pour bill of materials (BOM)

133 components, 28 distinct parts.

QtyPartRefs
2
TS02-66-80-BK-160-LCR-D
IC1, IC3
1
TPA6102A2DGKR
IC2
1
MIC5504-3.3YM5-TR
IC4
1
USBLC6-2SC6
IC5
1
STM32F072C8Tx
U1
1
16 MHz
Y1
1
TSW-106-07-T-S
SWD header
J1
1
216990-0003
J2
1
MEM2061-01-188-00-A
J3
1
TE122001-6
SMT-0830-T-HT-R
LS1
1
EG1218
SLW-913535-2A-RA-D
S1
30
~
S2, S3, S4, S5, S6, S7, S8, S9 +22
1
PEC12R-4125F-S0012
SW1
2
GREEN
D1, D33
1
RED
D2
30
1N4148W
D3, D4, D5, D6, D7, D8, D9, D10 +22
4
~
D34, D35, D36, D37
3
180 @ 100 MHz
FB1, FB2, FB3
14
100n
C1, C2, C3, C4, C5, C6, C8, C15 +6
6
4u7
C7, C9, C11, C23, C25, C30
Show 8 more
QtyPartRefs
1
8pF
C10
1
8pF
C12
5
1u
C13, C14, C22, C24, C27
1
10u
C16
1
68u
C17
3
280
R1, R2, R19
16
10K
R3, R4, R5, R6, R7, R8, R9, R10 +8
2
5.1k
R20, R21

Keyboard stm32 with copper pour design files

The KiCad project lives in the Jonkaphi/Numerical-Keypad-with-Audio-FX repository on GitHub; these links point at the commit this page was built from.

Keyboard stm32 with copper pour: common questions

What microcontroller does the Keyboard stm32 with copper pour use?

The Keyboard stm32 with copper pour is built around the STM32F072C8Tx, from the STM32 family.

How big is the Keyboard stm32 with copper pour PCB?

The Keyboard stm32 with copper pour measures 168.3 × 122.5 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Keyboard stm32 with copper pour?

133 components, from 28 distinct parts. The full bill of materials is listed on this page.

Where can I download the Keyboard stm32 with copper pour design files?

From the Jonkaphi/Numerical-Keypad-with-Audio-FX repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Keyboard stm32 with copper pour design in my own project?

Yes, under the terms of its MIT license, which Jonkaphi chose for the repository.

Can I test firmware for the Keyboard stm32 with copper pour without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in Numerical-Keypad-with-Audio-FX

Similar boards