CANFD-Breakout with-JST-PH3

jonnylin22·CANFD-PHY·kicad/version2-with-JST-PH3/CANFD-Breakout-with-JST-PH3.kicad_pcb

CANFD-Breakout with-JST-PH3 layout, top view — open source board by jonnylin22

About the CANFD-Breakout with-JST-PH3

CANFD-Breakout with-JST-PH3 is an open source PCB design by jonnylin22, published on GitHub. It is a 2-layer board measuring 42.1 × 16.1 mm, with 12 components from 8 distinct parts.

Other key parts include the MCP2562FD-E/SN. By type, the board carries 4 resistors, 3 diodes, 3 capacitors, 1 IC and 1 connector.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

This is a board with the same components except that it is routed to a JST-PH3 right angle horizontal connector to allow for use of JST-PH3 cables for the CAN bus

Main components on the CANFD-Breakout with-JST-PH3

CANFD-Breakout with-JST-PH3 bill of materials (BOM)

12 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MCP2562FD-E/SN
MCP2562FD-E_SN
U1
1
S3B-PH-K-S
Conn_01x03_Socket
J1
2
LTST-C191KRKT
LED
D1, D2
1
CDSOT23-T24CAN
D3
2
CL10E104KC8VPNC
100n
C1, C3
1
C0402C472J5RACTU
4.7n
C2
2
RC0402FR-0762RL
60R
R1, R2
2
RC0603FR-072K2L
2k2
R3, R4

CANFD-Breakout with-JST-PH3 design files

The KiCad project lives in the jonnylin22/CANFD-PHY repository on GitHub; these links point at the commit this page was built from.

CANFD-Breakout with-JST-PH3: common questions

How big is the CANFD-Breakout with-JST-PH3?

The CANFD-Breakout with-JST-PH3 measures 42.1 × 16.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the CANFD-Breakout with-JST-PH3?

12 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the CANFD-Breakout with-JST-PH3 design files?

From the jonnylin22/CANFD-PHY repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the CANFD-Breakout with-JST-PH3 design in my own project?

The repository has no license, so all rights stay with jonnylin22. Use it as a reference, and ask the author before reusing the design.

More boards in CANFD-PHY

Similar boards