Clockmodule
JopjeKnopje·clockmodule·rev-0.1/clockmodule.kicad_pcb
About the Clockmodule PCB
Clockmodule is an open source PCB design by JopjeKnopje, published on GitHub. It is a 2-layer board measuring 90 × 65 mm, with 38 components from 19 distinct parts.
Other key parts include the NE555P, L7805_J and 7400. By type, the board carries 11 capacitors, 11 resistors, 5 ICs, 5 diodes, 3 connectors and 2 switches.
From the project
Clock Module
The idea behind this project is to have a standalone clock circuit to debug ICs at a very low clock speed.
It is mainly inspired by Ben Eater's version.

Main components on the Clockmodule
Clockmodule bill of materials (BOM)
38 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | NE555P | DIP-8_W7.62mm | U1, U6, U7 |
| 1 | L7805_J | TO-220-3_Horizontal_TabDown | U3 |
| 1 | 7400 | DIP-14_W7.62mm | U8 |
| 1 | Vin | PinSocket_1x02_P2.54mm_Vertical | J1 |
| 1 | Clock output | PinSocket_1x02_P2.54mm_Vertical | J2 |
| 1 | DC Input | BarrelJack_GCT_DCJ200-10-A_Horizontal | J3 |
| 1 | 100K | trimmer_alps-rk09k1130ah1 | RV1 |
| 2 | SW_Push | SW_PUSH_6mm_H5mm | SW1, SW2 |
| 1 | 1N4007 | D_DO-41_SOD81_P7.62mm_Horizontal | D1 |
| 4 | LED | LED_D5.0mm | D2, D3, D4, D5 |
| 2 | 0.01uF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C10 |
| 2 | 4.7uF | CP_Radial_D4.0mm_P1.50mm | C2, C12 |
| 1 | 470 | CP_Radial_D6.3mm_P2.50mm | C3 |
| 1 | .33uF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C4 |
| 4 | .1uF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C5, C6, C7, C9 |
| 1 | 1uF | CP_Radial_D4.0mm_P1.50mm | C8 |
| 7 | 1K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3, R4, R6, R9, R11 |
| 2 | 51K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R5, R10 |
| 2 | 10K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R7, R8 |
Clockmodule design files
The KiCad project lives in the JopjeKnopje/clockmodule repository on GitHub; these links point at the commit this page was built from.
- Layoutrev-0.1/clockmodule.kicad_pcb
- Schematicrev-0.1/clockmodule.kicad_sch
Clockmodule: common questions
How big is the Clockmodule PCB?
The Clockmodule measures 90 × 65 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Clockmodule?
38 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Clockmodule design files?
From the JopjeKnopje/clockmodule repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Clockmodule design in my own project?
The repository has no license, so all rights stay with JopjeKnopje. Use it as a reference, and ask the author before reusing the design.