39 open source boards using the 7400

Real designs built with the 7400, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

39 boardsClear filters|Most starred

How designs wire the 7400

Read from the KiCad layouts of 34 open source designs, one per repository: what each pin of the 7400 connects to, and the resistors, capacitors and other passives placed on it.

GNDpin 7Connected to: GND 97%
VCCpin 14Connected to: VCC 100%
  • Decoupling capacitor on 38% · 100 nF (5), 1 µF (2)

12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Storage by jes, OpenKickstartSwitcher by SukkoPera, 486 Board by FoxCutter and Eda designs by kyllikki.

The 7400 in open source designs

The gallery holds 39 open source boards using the 7400 from 35 GitHub repositories; a typical one measures about 102.5 × 95.6 mm and carries around 34 components.

85% are two-layer designs, the rest use four layers or more, and 36% carry an open source license.

The most starred is Storage by jes.

Microcontrollers on boards using the 7400

7400: common questions

Where can I find a 7400 reference design?

Each of the 39 boards on this page is a real design using the 7400. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the 7400?

The 74LS08, 74LS04, 74LS163, 74LS32 and 28C256 appear in the most repositories here.

Which microcontrollers do boards using the 7400 use?

Most are built on AVR/Arduino (4), PIC (1) and STM32 (1).

How big is a typical board using the 7400?

The median is 102.5 × 95.6 mm, and 85% are two-layer designs.

What is the most popular open source board using the 7400?

By GitHub stars, Storage by jes, with 301 stars.

Can I simulate one of these boards using the 7400 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part