Clockmodule flipflop
JopjeKnopje·clockmodule·rev-0.1/clockmodule_flipflop.kicad_pcb
About the Clockmodule flipflop PCB
Clockmodule flipflop is an open source PCB design by JopjeKnopje, published on GitHub. It is a 2-layer board measuring 256.7 × 47 mm, with 41 components from 18 distinct parts.
Other key parts include the NE555P, 74LS107, L7805_J, 74LS08 and 74HC86. By type, the board carries 14 capacitors, 9 resistors, 7 ICs, 5 diodes, 3 connectors and 2 switches.
From the project
Clock Module
The idea behind this project is to have a standalone clock circuit to debug ICs at a very low clock speed.
It is mainly inspired by Ben Eater's version.

Main components on the Clockmodule flipflop
Clockmodule flipflop bill of materials (BOM)
41 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | NE555P | DIP-8_W7.62mm | U1, U6, U7 |
| 1 | 74LS107 | DIP-14_W7.62mm | U2 |
| 1 | L7805_J | TO-220-3_Horizontal_TabDown | U3 |
| 1 | 74LS08 | DIP-14_W7.62mm | U4 |
| 1 | 74HC86 | DIP-14_W7.62mm | U5 |
| 2 | Conn_01x02_Female | PinSocket_1x02_P2.54mm_Vertical | J1, J2 |
| 1 | Barrel_Jack_Switch | BarrelJack_GCT_DCJ200-10-A_Horizontal | J3 |
| 1 | 100K | Potentiometer_Alps_RK09K_Single_Vertical | RV1 |
| 2 | SW_Push | SW_PUSH_6mm_H5mm | SW1, SW2 |
| 1 | 1N4007 | D_DO-41_SOD81_P7.62mm_Horizontal | D1 |
| 4 | LED | LED_D5.0mm | D2, D3, D4, D5 |
| 3 | 0.01uF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C10, C13 |
| 3 | 4.7uF | CP_Radial_D4.0mm_P1.50mm | C2, C12, C14 |
| 1 | 470 | CP_Radial_D6.3mm_P2.50mm | C3 |
| 1 | .33uF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C4 |
| 6 | .1uF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C5, C6, C7, C8, C9, C11 |
| 7 | 1K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3, R4, R6, R7, R9 |
| 2 | 51K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R5, R8 |
Clockmodule flipflop design files
The KiCad project lives in the JopjeKnopje/clockmodule repository on GitHub; these links point at the commit this page was built from.
Clockmodule flipflop: common questions
How big is the Clockmodule flipflop PCB?
The Clockmodule flipflop measures 256.7 × 47 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Clockmodule flipflop?
41 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Clockmodule flipflop design files?
From the JopjeKnopje/clockmodule repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Clockmodule flipflop design in my own project?
The repository has no license, so all rights stay with JopjeKnopje. Use it as a reference, and ask the author before reusing the design.