PCB-usbc bench power supply
jordan-will·PCB-usbc-bench-power-supply
About the PCB-usbc bench power supply
PCB-usbc bench power supply is an open source PCB design by jordan-will, published on GitHub. It is a 2-layer board measuring 41.5 × 26 mm, with 11 components from 9 distinct parts.
Other key parts include the AMS1117-3.3. By type, the board carries 3 connectors, 3 resistors, 2 capacitors, 1 IC, 1 fuse and 1 diode.
It belongs with the power & battery designs in this gallery.
From the project
Compact USB-C powered benchtop power supply PCB providing protected 5V and regulated 3.3V rails for hardware prototyping.
This repository contains the complete hardware design for a compact auxiliary benchtop power supply powered via a USB-C connector. The circuit is designed to provide stable DC outputs at 5 V and 3.3 V for prototyping electronic and microcontroller-based projects.
The primary objective of this project is to convert power from a USB-C input into safe, protected low-voltage power rails for testbench prototyping.

Main components on the PCB-usbc bench power supply
PCB-usbc bench power supply bill of materials (BOM)
11 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4110 | J1 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J2 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Polyfuse | Fuse_1206_3216Metric | F1 |
| 1 | LED | LED_0805_2012Metric | D1 |
| 2 | 10uF | C_0805_2012Metric | C1, C2 |
| 2 | 5.1kR | R_0805_2012Metric | R1, R2 |
| 1 | 1kR | R_0805_2012Metric | R3 |
PCB-usbc bench power supply design files
The KiCad project lives in the jordan-will/PCB-usbc-bench-power-supply repository on GitHub; these links point at the commit this page was built from.
PCB-usbc bench power supply: common questions
How big is the PCB-usbc bench power supply?
The PCB-usbc bench power supply measures 41.5 × 26 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PCB-usbc bench power supply?
11 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the PCB-usbc bench power supply design files?
From the jordan-will/PCB-usbc-bench-power-supply repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PCB-usbc bench power supply design in my own project?
The repository has no license, so all rights stay with jordan-will. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k