Typomatrix stm32
josh-l-wang·typomatrix_stm32·kicad/typomatrix_stm32.kicad_pcb
About the Typomatrix stm32 PCB
Typomatrix stm32 is an open source STM32 PCB design by josh-l-wang, published on GitHub under the MIT license. It is a 2-layer board measuring 287.3 × 138.1 mm, with 230 components from 22 distinct parts.
Its main chip is the XC6206PXXXMR-REGULATOR_LINEAR, from the STM32 family. Other key parts include the STM32F072CBT6 and PRTR5V0U2X. By type, the board carries 96 diodes, 11 capacitors, 9 switches, 5 resistors, 3 ICs and 1 transistor.
It belongs with the keyboards designs in this gallery.
From the project
typomatrix 3020 keyboard on STM32F072 controller
Main components on the Typomatrix stm32
Typomatrix stm32 bill of materials (BOM)
230 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XC6206PXXXMR-REGULATOR_LINEAR XC6206PxxxMR-Regulator_Linear | SOT-23 | U1 |
| 1 | STM32F072CBT6 | LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | PRTR5V0U2X | SOT-143 | U3 |
| 1 | 2N7002 | SOT-23 | Q1 |
| 1 | USB_C_RECEPTACLE_USB2.0 USB_C_Receptacle_USB2.0 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | ASMD1206-150 | Fuse_1206_3216Metric | F1 |
| 100 | C5156480 MX_SW_HS | SW_MX_HS_1u | MX1, MX2, MX3, MX4, MX5, MX6, MX7, MX8 +92 |
| 2 | C5156480 MX_SW_HS | SW_MX_HS_1.5u | MX84, MX85 |
| 5 | MX_stab | STAB_MX_P_2u | S1, S2, S3, S4, S5 |
| 1 | MX_stab | STAB_MX_P_4u | S6 |
| 1 | MX_stab | STAB_MX_P_2.75u | S7 |
| 1 | MX_stab | STAB_MX_P_2.25u | S8 |
| 1 | C318884 RESET | SW_SPST_SKQG_WithoutStem | SW1 |
| 96 | C81598 D_Small | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +88 |
| 1 | C33600 60R@100MHz MELED Industrial | L_1206_3216Metric | L1 |
| 6 | 100NF 100nF | C_0402_1005Metric | C1, C2, C3, C4, C5, C11 |
| 1 | 10UF 10uF | C_0603_1608Metric | C6 |
| 3 | 1UF 1uF | C_0402_1005Metric | C7, C8, C10 |
| 1 | 4.7UF 4.7uF | C_0402_1005Metric | C9 |
| 2 | 5.1K 5.1k | R_0402_1005Metric | R1, R2 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 10K 10k | R_0402_1005Metric | R3, R4 |
| 1 | 100K 100k | R_0402_1005Metric | R5 |
Typomatrix stm32 design files
The KiCad project lives in the josh-l-wang/typomatrix_stm32 repository on GitHub; these links point at the commit this page was built from.
Typomatrix stm32: common questions
What microcontroller does the Typomatrix stm32 use?
The Typomatrix stm32 is built around the XC6206PXXXMR-REGULATOR_LINEAR, from the STM32 family.
How big is the Typomatrix stm32 PCB?
The Typomatrix stm32 measures 287.3 × 138.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Typomatrix stm32?
230 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Typomatrix stm32 design files?
From the josh-l-wang/typomatrix_stm32 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Typomatrix stm32 design in my own project?
Yes, under the terms of its MIT license, which josh-l-wang chose for the repository.
Can I test firmware for the Typomatrix stm32 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k