BusDebugger
joshop·Papyrus-MITRT·KiCAD/boards/BusDebugger/BusDebugger.kicad_pcb
About the BusDebugger PCB
BusDebugger is an open source STM32 PCB design by joshop, published on GitHub. It is a 2-layer board measuring 111.9 × 39.5 mm, with 46 components from 19 distinct parts.
Its main chip is the STM32C092KBT6, from the STM32 family. Other key parts include the SST25PF020B-80-4C-SAE, AZ1117-3.3, SN65HVD232QDRG4Q1 and NHD-C0220BIZ. By type, the board carries 14 resistors, 10 capacitors, 8 switches, 5 ICs, 4 diodes and 3 connectors.
From the project
MIT Rocket Team Liquid Propulsion Avionics
Main components on the BusDebugger
BusDebugger bill of materials (BOM)
46 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32C092KBT6 | LQFP-32_STM | U1 |
| 1 | SST25PF020B-80-4C-SAE | SOIC8_SA_SST_MCH | U2 |
| 1 | AZ1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | SN65HVD232QDRG4Q1 | D8 | U4 |
| 1 | NHD-C0220BIZ | NHD-C0220BiZ | U5 |
| 1 | AO3400A | SOT-23 | Q1 |
| 2 | CONN_01X05 Conn_01x05 | JST_XH_S5B-XH-A-1_1x05_P2.50mm_Horizontal | J2, J4 |
| 1 | Conn_01x02 | PinHeader_1x02_P1.27mm_Vertical | J3 |
| 1 | Buzzer | Buzzer_CUI_CPT-9019S-SMT | BZ1 |
| 7 | SW_Push | SW_Push_1P1T_NO_CK_KMR2 | SW1, SW2, SW3, SW4, SW5, SW6, SW7 |
| 1 | SW_SPDT | SW_Slide_SPDT_Straight_CK_OS102011MS2Q | SW8 |
| 3 | LED | D_0603_1608Metric | D1, D2, D3 |
| 1 | B120-E3 | D_SMA | D4 |
| 3 | 10U 10u | C_0603_1608Metric | C1, C3, C10 |
| 4 | 0.1U 0.1u | C_0603_1608Metric | C2, C4, C5, C7 |
| 3 | 1u | C_0603_1608Metric | C6, C8, C9 |
| 11 | 1k | R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R9 +3 |
| 1 | 3.3K 3.3k | R_0603_1608Metric | R8 |
| 2 | 10K 10k | R_0603_1608Metric | R10, R11 |
BusDebugger design files
The KiCad project lives in the joshop/Papyrus-MITRT repository on GitHub; these links point at the commit this page was built from.
BusDebugger: common questions
What microcontroller does the BusDebugger use?
The BusDebugger is built around the STM32C092KBT6, from the STM32 family.
How big is the BusDebugger PCB?
The BusDebugger measures 111.9 × 39.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BusDebugger?
46 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the BusDebugger design files?
From the joshop/Papyrus-MITRT repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the BusDebugger design in my own project?
The repository has no license, so all rights stay with joshop. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the BusDebugger without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in Papyrus-MITRT
STM32
BusDebugger pre
joshop
111.6 × 39.5 mm44 parts2LNo license1STM32
TC3Controller
joshop
35 × 37.3 mm34 parts2LNo license1STM32
Serv3Controller
joshop
42.4 × 29.6 mm33 parts2LNo license1STM32
Serv3Controller Orig
joshop
42.4 × 29.6 mm33 parts2LNo license1STM32
DevBoard
joshop
29.4 × 24.6 mm13 parts2LNo license1
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k