TC3Controller

joshop·Papyrus-MITRT·KiCAD/boards/TC3Controller/TC3Controller.kicad_pcb

TC3Controller PCB layout, top view — open source STM32 board by joshop

About the TC3Controller PCB

TC3Controller is an open source STM32 PCB design by joshop, published on GitHub. It is a 2-layer board measuring 35 × 37.3 mm, with 34 components from 15 distinct parts.

Its main chip is the STM32C092KBT6, from the STM32 family. Other key parts include the SST25PF020B-80-4C-SAE, AZ1117-3.3, SN65HVD232QDRG4Q1, NHD-C0220BIZ and MAX31855KASA. By type, the board carries 17 capacitors, 6 ICs, 5 connectors, 3 diodes and 3 resistors.

It belongs with the sensors designs in this gallery.

From the project

MIT Rocket Team Liquid Propulsion Avionics

We considered designing our own thermocouple amplifier to save cost, but decided not to. If necessary, this could be implemented as follows: - Using a low noise amplifier such as the LMP7716MMX/NOPB (dual), produce a desired gain with feedback. - Use another amplifier device, likely in the same dual package, to buffer a resistor divider and offset the voltage to allow reading of temperatures below the cold junction temperature. - Separately, connect a temperature sensor such as the TMP126EDBVRQ1 and perform cold junction compensation in software. Cold junction compensators and buffers could…

Main components on the TC3Controller

STM32C092KBT6SST25PF020B-80-4C-SAEAZ1117-3.3SN65HVD232QDRG4Q1NHD-C0220BIZMAX31855KASA

TC3Controller bill of materials (BOM)

34 components, 15 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32C092KBT6
STM32C092FCP6
U1
1
SST25PF020B-80-4C-SAE
SN65HVD232QDRG4Q1
U2
1
AZ1117-3.3
SST25PF020B-80-4C-SAE
U3
1
SN65HVD232QDRG4Q1
MAX31855KASA
U4
1
NHD-C0220BIZ
MAX31855KASA
U5
1
MAX31855KASA
U6
2
CONN_01X05
Screw_Terminal_01x02
J2, J4
1
Screw_Terminal_01x02
J3
2
Conn_01x05
J5, J6
3
LED
D1, D2, D3
3
10U
100n
C1, C3, C10
1
0.1U
10u
C2
3
0.1U
100n
C4, C5, C7
10
100n
C6, C8, C9, C11, C12, C13, C14, C15 +2
3
1k
R1, R2, R3

TC3Controller design files

The KiCad project lives in the joshop/Papyrus-MITRT repository on GitHub; these links point at the commit this page was built from.

TC3Controller: common questions

What microcontroller does the TC3Controller use?

The TC3Controller is built around the STM32C092KBT6, from the STM32 family.

How big is the TC3Controller PCB?

The TC3Controller measures 35 × 37.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the TC3Controller?

34 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the TC3Controller design files?

From the joshop/Papyrus-MITRT repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the TC3Controller design in my own project?

The repository has no license, so all rights stay with joshop. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the TC3Controller without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in Papyrus-MITRT

Similar boards