Serv3Controller
joshop·Papyrus-MITRT·KiCAD/boards/Serv3Controller/Serv3Controller.kicad_pcb
About the Serv3Controller PCB
Serv3Controller is an open source STM32 PCB design by joshop, published on GitHub. It is a 2-layer board measuring 42.4 × 29.6 mm, with 33 components from 18 distinct parts.
Its main chip is the STM32C092KBT6, from the STM32 family. Other key parts include the SST25PF020B-80-4C-SAE. By type, the board carries 8 capacitors, 8 resistors, 7 connectors, 5 diodes, 3 transistors and 2 ICs.
It belongs with the robotics & motion designs in this gallery.
From the project
MIT Rocket Team Liquid Propulsion Avionics
Main components on the Serv3Controller
Serv3Controller bill of materials (BOM)
33 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32C092KBT6 STM32C092FCP6 | TSSOP20_STM | U1 |
| 1 | SST25PF020B-80-4C-SAE SN65HVD232QDRG4Q1 | D8 | U2 |
| 1 | AO3400A | SOT-23 | Q1 |
| 2 | AO3400A | SOT-23 | Q2, Q3 |
| 1 | CONN_01X05 Screw_Terminal_01x02 | TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | J2 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | J3 |
| 1 | CONN_01X05 Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 2 | Conn_01x05 | JST_XH_S5B-XH-A-1_1x05_P2.50mm_Horizontal | J5, J6 |
| 2 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J7, J8 |
| 4 | LED | LED_0603_1608Metric | D1, D2, D3, D5 |
| 1 | B120-E3 LED | LED_0603_1608Metric | D4 |
| 2 | 10U 100n | C_0603_1608Metric | C1, C3 |
| 3 | 0.1U 10u | C_0603_1608Metric | C2, C5, C7 |
| 1 | 0.1U 100n | C_0603_1608Metric | C4 |
| 2 | 10u | C_0603_1608Metric | C6, C8 |
| 4 | 1k | R_0603_1608Metric | R1, R2, R6, R7 |
| 3 | 33m | R_0603_1608Metric | R3, R4, R5 |
| 1 | 3.3K 1k | R_0603_1608Metric | R8 |
Serv3Controller design files
The KiCad project lives in the joshop/Papyrus-MITRT repository on GitHub; these links point at the commit this page was built from.
Serv3Controller: common questions
What microcontroller does the Serv3Controller use?
The Serv3Controller is built around the STM32C092KBT6, from the STM32 family.
How big is the Serv3Controller PCB?
The Serv3Controller measures 42.4 × 29.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Serv3Controller?
33 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Serv3Controller design files?
From the joshop/Papyrus-MITRT repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Serv3Controller design in my own project?
The repository has no license, so all rights stay with joshop. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Serv3Controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in Papyrus-MITRT
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k