DevBoard

joshop·Papyrus-MITRT·KiCAD/boards/DevBoard/DevBoard.kicad_pcb

DevBoard PCB layout, top view — open source STM32 board by joshop

About the DevBoard PCB

DevBoard is an open source STM32 PCB design by joshop, published on GitHub. It is a 2-layer board measuring 29.4 × 24.6 mm, with 13 components from 11 distinct parts.

Its main chip is the STM32C092KBT6, from the STM32 family. Other key parts include the SST25PF020B-80-4C-SAE and AZ1117-3.3. By type, the board carries 5 capacitors, 3 ICs, 3 connectors, 1 diode and 1 resistor.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

MIT Rocket Team Liquid Propulsion Avionics

Main components on the DevBoard

STM32C092KBT6SST25PF020B-80-4C-SAEAZ1117-3.3

DevBoard bill of materials (BOM)

13 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32C092KBT6
STM32C092FCP6
U1
1
SST25PF020B-80-4C-SAE
SN65HVD232QDRG4Q1
U2
1
AZ1117-3.3
SST25PF020B-80-4C-SAE
U3
1
CONN_01X05
Conn_01x09
J2
1
Conn_01x08
J3
1
CONN_01X05
Conn_01x08
J4
1
LED
D1
2
10U
100n
C1, C3
1
0.1U
10u
C2
2
0.1U
100n
C4, C5
1
1k
R1

DevBoard design files

The KiCad project lives in the joshop/Papyrus-MITRT repository on GitHub; these links point at the commit this page was built from.

DevBoard: common questions

What microcontroller does the DevBoard use?

The DevBoard is built around the STM32C092KBT6, from the STM32 family.

How big is the DevBoard PCB?

The DevBoard measures 29.4 × 24.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the DevBoard?

13 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the DevBoard design files?

From the joshop/Papyrus-MITRT repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the DevBoard design in my own project?

The repository has no license, so all rights stay with joshop. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the DevBoard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in Papyrus-MITRT

Similar boards