HardLabs

UOM-3rdYear-Project-NMEA2000CapablePi

JossGrimwood·UOM-3rdYear-Project-NMEA2000CapablePi·PCB kicad/piHat/piHat.kicad_pcb

UOM-3rdYear-Project-NMEA2000CapablePi PCB layout, top view — open source Raspberry Pi board by JossGrimwood

About the UOM-3rdYear-Project-NMEA2000CapablePi PCB

UOM-3rdYear-Project-NMEA2000CapablePi is an open source Raspberry Pi PCB design by JossGrimwood, published on GitHub. It is a 2-layer board measuring 57 × 31 mm, with 15 components from 12 distinct parts.

Its main chip is the Raspberry_Pi_2_3, from the Raspberry Pi family. By type, the board carries 5 capacitors, 5 resistors and 2 connectors.

It belongs with the displays & leds designs in this gallery.

From the project

Project to interface a Raspberry Pi with an NMEA2000 network and send data to laptop for display

UOM-3rdYear-Project-NMEA2000CapablePi bill of materials (BOM)

15 components, 12 distinct parts.

QtyPartRefs
1
Conn_01x02_Pin
J1
1
Raspberry_Pi_2_3
J2
1
16MHZ
16mhz1
1
MCP2515-xSO
MCP2515
1
MCP2551-I-P
MCP2551
1
C
C1
2
C22pF
C1-22pF, C2-22pF
2
C_Polarized
C3, C4
2
R4K7
R1-4K7, R2-4K7
1
R
R3-4K7
1
R20K
R4-20K
1
R10K
R5-10K

UOM-3rdYear-Project-NMEA2000CapablePi design files

The KiCad project lives in the JossGrimwood/UOM-3rdYear-Project-NMEA2000CapablePi repository on GitHub; these links point at the commit this page was built from.

UOM-3rdYear-Project-NMEA2000CapablePi: common questions

What microcontroller does the UOM-3rdYear-Project-NMEA2000CapablePi use?

The UOM-3rdYear-Project-NMEA2000CapablePi is built around the Raspberry_Pi_2_3, from the Raspberry Pi family.

How big is the UOM-3rdYear-Project-NMEA2000CapablePi PCB?

The UOM-3rdYear-Project-NMEA2000CapablePi measures 57 × 31 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the UOM-3rdYear-Project-NMEA2000CapablePi?

15 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the UOM-3rdYear-Project-NMEA2000CapablePi design files?

From the JossGrimwood/UOM-3rdYear-Project-NMEA2000CapablePi repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the UOM-3rdYear-Project-NMEA2000CapablePi design in my own project?

The repository has no license, so all rights stay with JossGrimwood. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the UOM-3rdYear-Project-NMEA2000CapablePi without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

Similar boards