BlueMicro LED tester
About the BlueMicro LED tester PCB
BlueMicro LED tester is an open source PCB design by jpconstantineau, published on GitHub under the BSD-3-Clause license. It is a 2-layer board measuring 20.3 × 33 mm, with 43 components from 10 distinct parts.
Other key parts include the E73-2G4M04S1B. By type, the board carries 20 diodes, 20 resistors, 1 IC, 1 connector and 1 switch.
It belongs with the power & battery designs in this gallery.
From the project
This Repository is a collection of NRF5x boards.
Main components on the BlueMicro LED tester
BlueMicro LED tester bill of materials (BOM)
43 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | E73-2G4M04S1B ProMicro ebyte | Pro_Micro | U1 |
| 1 | A01SB141B1-067 Conn_01x02_Male Jing Extension of the Electronic Co. | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | SW_PUSH | SW_TACT_ALPS_SKQGABE010 | SW1 |
| 1 | MBR120LSF LED SK | LED_0603_1608Metric | D1 |
| 19 | LED | LED_0603_1608Metric | D2, D3, D4, D5, D6, D7, D8, D9 +11 |
| 2 | RC0805FR-0710KL 2k2 YAGEO | R_0603_1608Metric | R1, R3 |
| 1 | RC0805FR-07100KL 2k2 YAGEO | R_0603_1608Metric | R2 |
| 1 | AC0805FR-07806KL 2k2 YAGEO | R_0603_1608Metric | R4 |
| 1 | RC0805JR-072ML 2k2 YAGEO | R_0603_1608Metric | R5 |
| 15 | 2k2 | R_0603_1608Metric | R6, R7, R8, R9, R10, R11, R12, R13 +7 |
BlueMicro LED tester design files
The KiCad project lives in the jpconstantineau/NRF52-Board repository on GitHub; these links point at the commit this page was built from.
BlueMicro LED tester: common questions
How big is the BlueMicro LED tester PCB?
The BlueMicro LED tester measures 20.3 × 33 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BlueMicro LED tester?
43 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the BlueMicro LED tester design files?
From the jpconstantineau/NRF52-Board repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the BlueMicro LED tester design in my own project?
Yes, under the terms of its BSD-3-Clause license, which jpconstantineau chose for the repository.
More boards in NRF52-Board
ErgoTravel
137.9 × 92.7 mm63 parts2LBSD-3-Clause100
AVR/ArduinoBlueMacro LED Tester
40.6 × 48.3 mm57 parts2LBSD-3-Clause100
BlueMicroold
21.6 × 62.2 mm48 parts4LBSD-3-Clause100
4layers
21.6 × 62.2 mm48 parts4LBSD-3-Clause100
BlueMicro
21.6 × 62.2 mm47 parts2LBSD-3-Clause100
EByte E73
21.6 × 62.2 mm39 parts2LBSD-3-Clause100
EByte E73 tester
79.3 × 49.5 mm34 parts2LBSD-3-Clause100
BlueMicro840
20 × 32 mm29 parts2LBSD-3-Clause100
AVR/ArduinoBlueMacro
20.3 × 48.3 mm29 parts4LBSD-3-Clause100
BlueMicro840 vddh
20.3 × 31.8 mm28 parts2LBSD-3-Clause100
Dongle840
34.3 × 15.2 mm13 parts2LBSD-3-Clause100
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
Module 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k