TetrisBusinessCard

JSchneid850·tetrisBusinessCard·tetrisBusinessCard/tetrisBusinessCard.kicad_pcb

About the TetrisBusinessCard PCB

TetrisBusinessCard is an open source RP2040/RP2350 PCB design by JSchneid850, published on GitHub. It is a 2-layer board measuring 48.7 × 84.5 mm, with 496 components from 13 distinct parts.

Its main chip is the SC091413, from the RP2040/RP2350 family. Other key parts include the W25Q16JVUXIQ. By type, the board carries 462 diodes, 15 capacitors, 7 switches, 7 resistors, 2 ICs and 1 crystal.

Main components on the TetrisBusinessCard

SC091413 W25Q16JVUXIQ

TetrisBusinessCard bill of materials (BOM)

496 components, 13 distinct parts — part numbers from the project's BOM.

Qty	Part	Footprint	Refs
1	SC091413	QFN56_7X7_RPI	U1
1	W25Q16JVUXIQ	W25Q16JVUXIQ_WIN	U2
1	ABMB-272-T3	Crystal_SMD_3225-4Pin_3.2x2.5mm	Y1
1	~	PogoConnector	PogoConnector1
1	BS-02-A1BK007	BAT_BS-02_MYG-NoDrill	B1
6	SW_Push	SW_PTS647SM38SMTR2LFS_CNK	SW1, SW2, SW3, SW4, SW5, SW6
1	SW_DPST_X2 SW_DPST_x2	SW_SPDT_PCM12	SW7
462	LED	LED_0603_1608MetricAdjusted	D1, D2, D3, D4, D5, D6, D7, D8 +454
11	100N 100n	C_0603_1608Metric	C1, C2, C3, C4, C5, C7, C9, C10 +3
2	1u	C_0603_1608Metric	C6, C8
2	15p	C_0603_1608Metric	C16, C17
1	1kΩ	R_0603_1608Metric	R5
6	10kΩ	R_0603_1608Metric	R6, R7, R8, R9, R10, R11

TetrisBusinessCard design files

The KiCad project lives in the JSchneid850/tetrisBusinessCard repository on GitHub; these links point at the commit this page was built from.

TetrisBusinessCard: common questions

What microcontroller does the TetrisBusinessCard use?

The TetrisBusinessCard is built around the SC091413, from the RP2040/RP2350 family.

How big is the TetrisBusinessCard PCB?

The TetrisBusinessCard measures 48.7 × 84.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the TetrisBusinessCard?

496 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the TetrisBusinessCard design files?

From the JSchneid850/tetrisBusinessCard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the TetrisBusinessCard design in my own project?

The repository has no license, so all rights stay with JSchneid850. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the TetrisBusinessCard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.