115 open source boards using the W25Q16JVUXIQ
Real designs built with the W25Q16JVUXIQ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Hid remapper
jfedor2
100 × 100 mm124 parts2LMIT1.7kRaspberry Pi
CM5RevEng
schlae
55 × 40 mm417 parts10LNo license1.0kRP2040/RP2350
Easyduino RP2040
Hanqaqa
21 × 51 mm44 parts4LCERN-OHL-P-2.0754RP2040/RP2350
Dspico hardware
LNH-team
27.2 × 32 mm44 parts4LCC-BY-SA-4.0599STM32
Keyword
notaroomba
19.1 × 19.1 mm69 parts4LNo license438RP2040/RP2350
Peacock
george-norton
172 × 152.9 mm74 parts2LCERN-OHL-S-2.0307RP2040/RP2350
16nx
16n-faderbank
248.9 × 120.7 mm151 parts2LCustom license76RP2040/RP2350
X1CarbonGen10
cscott
86.4 × 50.8 mm42 parts2LNo license33Nordic nRF
RoyalBlue54L-Feather
LordsBoards
58.4 × 22.9 mm48 parts8LCERN-OHL-P-2.031RP2040/RP2350
Compact-SimpleFOC-Board
maruta
35 × 35 mm61 parts4LMIT22RP2040/RP2350
RGB-Panel
corndog2000
80 × 125.4 mm652 parts2LCC-BY-NC-4.021RP2040/RP2350
Pcb
FlipperMCE
32.2 × 59.4 mm54 parts2LMIT19RP2040/RP2350
Leyden Jar controller
mymakercorner
85 × 26.5 mm82 parts4LGPL-3.017RP2040/RP2350
Riotee Board
NessieCircuits
55.9 × 22.9 mm80 parts4LCERN-OHL-W-2.015RP2040/RP2350
MX-Break-In-Machine
FinnKrass
43.1 × 37.7 mm63 parts4LCERN-OHL-S-2.015RP2040/RP2350
Firestring
thip
40 × 18 mm36 parts2LCC-BY-NC-4.014RP2040/RP2350
CellKeeper
cellkeeper-bms
260 × 113 mm405 parts4LGPL-3.011RP2040/RP2350
Kerigokbd
kerikun11
139.5 × 92 mm80 parts2LNo license11RP2040/RP2350
Clops
calvin-mcd
234.5 × 96 mm105 parts2LGPL-3.010RP2040/RP2350
StealthBurner CAN Main
CharlieYu4994
53 × 40 mm87 parts4LNo license10RP2040/RP2350
Testy
mmalex
39.5 × 64.7 mm61 parts2LMIT10RP2040/RP2350
YM60JIS
ymkn
285.1 × 94.6 mm165 parts2LMIT9ESP32
ESP32S3 M.2 Board
ItsNotDaan
23 × 42 mm54 parts4LCERN-OHL-P-2.08RP2040/RP2350
Riotee ProbeHardware
NessieCircuits
43.2 × 22.9 mm69 parts4LCERN-OHL-W-2.07RP2040/RP2350
Main board
AllenNeuralDynamics
80 × 50 mm183 parts4LMIT5RP2040/RP2350
Phoenix Project No 1 - Type H
mymakercorner
304 × 112 mm201 parts2LCC-BY-SA-4.03RP2040/RP2350
Low profile with trackball
ryoo14
228.8 × 76.2 mm137 parts2LNo license3RP2040/RP2350
Tallytime hardware
micro-henry
80 × 50 mm88 parts4LCERN-OHL-S-2.03FPGA
Mosaic
bitbarista
20.3 × 51.4 mm51 parts4LCustom license3RP2040/RP2350
Boardstorm x3
shashwtd
21 × 51 mm48 parts2LNo license3RP2040/RP2350
ANGAZA ELIMU
R-Mutura
131 × 78.5 mm207 parts4LNo license2RP2040/RP2350
Seven Segment Main Board
cscott
33.8 × 131 mm70 parts2LNo license2RP2040/RP2350
Wifi interposer
dsi-modchip
51.3 × 21 mm51 parts4LCERN-OHL-S-2.02RP2040/RP2350
SFP-Flasher
nxzz
45 × 40 mm41 parts4LNo license1RP2040/RP2350
Moonboard
newtontriumphant
22.3 × 52.2 mm37 parts2LNo license1RP2040/RP2350
Devboard
kaileh57
21 × 51 mm37 parts2LMIT1
How designs wire the W25Q16JVUXIQ
Read from the KiCad layouts of 94 open source designs, one per repository: what each pin of the W25Q16JVUXIQ connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 90 of 93 designs, most often 100 nF (then 1 µF).
- The CS pin has a series resistor on 71 of 94 designs, most often 1 kΩ (then 10 kΩ).
- The CS pin has a pull-up to 3.3V on 60 of 94 designs, most often 10 kΩ (then 1 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CSpin 1 | Connected to: The microcontroller 88% |
|
| GNDpin 4 | Connected to: GND 99% | — |
| VCCpin 8 | Connected to: 3.3V 97% |
|
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hid remapper by jfedor2, CM5RevEng by schlae, Easyduino RP2040 by Hanqaqa and Dspico hardware by LNH-team.
The W25Q16JVUXIQ in open source designs
The gallery holds 115 open source boards using the W25Q16JVUXIQ from 95 GitHub repositories; a typical one measures about 50 × 51 mm and carries around 72 components.
54% use four copper layers or more, and 43% carry an open source license.
The most starred is Hid remapper by jfedor2.
Parts used alongside the W25Q16JVUXIQ
Microcontrollers on boards using the W25Q16JVUXIQ
What boards using the W25Q16JVUXIQ are built for
W25Q16JVUXIQ: common questions
Where can I find a W25Q16JVUXIQ reference design?
Each of the 115 boards on this page is a real design using the W25Q16JVUXIQ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the W25Q16JVUXIQ VCC pin?
The VCC pin has a decoupling capacitor on 90 of 93 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 94 open source designs using the W25Q16JVUXIQ.
What resistor goes on the W25Q16JVUXIQ CS pin?
The CS pin has a series resistor on 71 of 94 designs, most often 1 kΩ (then 10 kΩ). Counted from the KiCad layouts of 94 open source designs using the W25Q16JVUXIQ.
What parts are used alongside the W25Q16JVUXIQ?
The RP2040, MCP1700T-3302E/TT, USBLC6-2SC6, RT6150B-33GQW and TPD2EUSB30 appear in the most repositories here.
Which microcontrollers do boards using the W25Q16JVUXIQ use?
Most are built on RP2040/RP2350 (104), Nordic nRF (3), FPGA (3) and ESP32 (2).
How big is a typical board using the W25Q16JVUXIQ?
The median is 50 × 51 mm, and 46% are two-layer designs.
What is the most popular open source board using the W25Q16JVUXIQ?
By GitHub stars, Hid remapper by jfedor2, with 1,705 stars.
Can I simulate one of these boards using the W25Q16JVUXIQ before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.