HardLabs

Vigor22 C

jstrebel·frontpanel_vigor·KiCAD/vigor22_C/vigor22_C.kicad_pcb

Vigor22 C PCB layout, top view — open source AVR/Arduino board by jstrebel

About the Vigor22 C PCB

Vigor22 C is an open source AVR/Arduino PCB design by jstrebel, published on GitHub. It is a 2-layer board measuring 122.9 × 70 mm, with 98 components from 22 distinct parts.

Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. Other key parts include the LM7810-10V and LTV-847. By type, the board carries 50 resistors, 15 diodes, 15 capacitors, 7 connectors, 6 transistors and 4 ICs.

From the project

Bedienung: Entwurf der das Bedieninterface der Kotrollerbox erklärt

Bedienung: Entwurf der das Bedieninterface der Kotrollerbox erklärt

Testcode: Beispiel lesen der Tastatur input mit dem Arduino

TFT display: Für die Anzeigen wird ein gut Dokumentierte Library verwendet. Doku auf: https://github.com/gavinlyonsrepo/DisplayLibRPI

Das ist der Code welcher der Entwickler für mich machte. Dieser Code ist mit dem Raspi 4 getestet. https://github.com/gavinlyonsrepo/ST7789TFTRPI/releases

Main components on the Vigor22 C

LM7810-10VLTV-847Arduino_Nano_v3.x

Vigor22 C bill of materials (BOM)

98 components, 22 distinct parts.

QtyPartRefs
1
~
U1
1
LM7810-10V
U2
2
LTV-847
U3, U4
1
Arduino_Nano_v3.x
A1
2
BSS138
Q1, Q2
4
Q_PNP_BEC
Q3, Q4, Q5, Q6
1
I2C
J1
2
spare
J2, J3
1
Motor 2
J4
1
Motor 1
J5
1
Handsteuerung
J6
1
12V Power
J7
7
LED
D1, D11, D12, D13, D14, D15, D16
8
D
D3, D4, D5, D6, D7, D8, D9, D10
14
47nF
C1, C2, C3, C4, C5, C6, C7, C8 +6
1
2.2uF
C16
6
1.2k
R1, R2, R4, R9, R49, R50
12
560
R5, R6, R7, R8, R10, R39, R40, R41 +4
4
10k
R11, R12, R13, R14
12
470
R15, R16, R17, R18, R31, R32, R33, R34 +4
Show 2 more
QtyPartRefs
8
2.2k
R19, R20, R25, R26, R27, R28, R29, R30
8
1k
R21, R22, R23, R24, R43, R44, R45, R46

Vigor22 C design files

The KiCad project lives in the jstrebel/frontpanel_vigor repository on GitHub; these links point at the commit this page was built from.

Vigor22 C: common questions

What microcontroller does the Vigor22 C use?

The Vigor22 C is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.

How big is the Vigor22 C PCB?

The Vigor22 C measures 122.9 × 70 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Vigor22 C?

98 components, from 22 distinct parts. The full bill of materials is listed on this page.

Where can I download the Vigor22 C design files?

From the jstrebel/frontpanel_vigor repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Vigor22 C design in my own project?

The repository has no license, so all rights stay with jstrebel. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Vigor22 C without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in frontpanel_vigor

Similar boards