HardLabs

Display mit raspiZ

jstrebel·frontpanel_vigor·KiCAD/display_mit_raspiZ/display_mit_raspiZ.kicad_pcb

Display mit raspiZ PCB layout, top view — open source board by jstrebel

About the Display mit raspiZ PCB

Display mit raspiZ is an open source PCB design by jstrebel, published on GitHub. It is a 2-layer board measuring 140 × 90.5 mm, with 49 components from 25 distinct parts.

Other key parts include the 10FLZ-SM2-TB, MCP2515-xSO, 74HC4051, TJA1050 and 20FLZ-SM2-TB. By type, the board carries 15 resistors, 13 connectors, 12 capacitors, 7 ICs, 1 transistor and 1 crystal.

It belongs with the displays & leds designs in this gallery.

From the project

Bedienung: Entwurf der das Bedieninterface der Kotrollerbox erklärt

Bedienung: Entwurf der das Bedieninterface der Kotrollerbox erklärt

Testcode: Beispiel lesen der Tastatur input mit dem Arduino

TFT display: Für die Anzeigen wird ein gut Dokumentierte Library verwendet. Doku auf: https://github.com/gavinlyonsrepo/DisplayLibRPI

Das ist der Code welcher der Entwickler für mich machte. Dieser Code ist mit dem Raspi 4 getestet. https://github.com/gavinlyonsrepo/ST7789TFTRPI/releases

Main components on the Display mit raspiZ

10FLZ-SM2-TBMCP2515-xSO74HC4051TJA105020FLZ-SM2-TB

Display mit raspiZ bill of materials (BOM)

49 components, 25 distinct parts.

QtyPartRefs
1
10FLZ-SM2-TB
U1
1
MCP2515-xSO
U2
3
74HC4051
U3, U5, U6
1
TJA1050
U4
1
20FLZ-SM2-TB
U7
1
2N7002E
Q1
1
Crystal
Y1
1
Conn_01x04_Pin
J1
1
Raspi GPIO
J2
1
Reserve GND
J3
1
Conn_01x06_Pin
J4
1
CAN Testpunkte
J5
1
Reserve 5V or 3.3V
J6
1
Display
J7
1
Conn_01x02_Pin
J8
2
Conn_01x02_Socket
J9, J11
1
Conn_02x10_Counter_Clockwise
J10
2
Conn_01x01
J12, J13
10
100nf
C1, C2, C3, C6, C7, C8, C9, C10 +2
2
22pf
C4, C5
Show 5 more
QtyPartRefs
1
390
R1
3
1
R2, R4, R5
1
10k
R3
1
120
R6
9
1k
R7, R8, R9, R10, R11, R12, R13, R14 +1

Display mit raspiZ design files

The KiCad project lives in the jstrebel/frontpanel_vigor repository on GitHub; these links point at the commit this page was built from.

Display mit raspiZ: common questions

How big is the Display mit raspiZ PCB?

The Display mit raspiZ measures 140 × 90.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Display mit raspiZ?

49 components, from 25 distinct parts. The full bill of materials is listed on this page.

Where can I download the Display mit raspiZ design files?

From the jstrebel/frontpanel_vigor repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Display mit raspiZ design in my own project?

The repository has no license, so all rights stay with jstrebel. Use it as a reference, and ask the author before reusing the design.

More boards in frontpanel_vigor

Similar boards